Put the device in console mode (shortcut . 2). Make sure you have a serial cable. Tell CW to debug on a device. It should work the same as most other devices. If you don't have a serial cable you can get em online. The only trick is that you have to get a Treo600 serial cable then use an adapter cable to make it work on a Treo650. Both cables should be easy to get from PalmOne.
-Aaron >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Jim Leno >Sent: Wednesday, June 29, 2005 5:07 PM >To: Palm Developer Forum >Subject: Treo Newbie - How to debug > > >I have never used a Treo 650 before; can you debug a 68k app on the >device using Codewarrior? Anything special I need to do to set it >up, put it in console mode, etc...? > >Thanks. > > >-- >For information on using the PalmSource Developer Forums, or >to unsubscribe, please see http://www.palmos.com/dev/support/forums/ > > -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
