Hi David,
MyApp dont handle sysAppLaunchCmdSystemReset.
i tried what u said and yes de Myaap don´t desapear, but if i run it i
get a fatal exeption.
Thank you
David Thacker escreveu:
Alexandre,
It may be a problem in your MyApp application if it handles the
sysAppLaunchCmdSystemReset launch code, but does something that NVFS is not
happy with there.
You can test this out by performing a "no-notify" reset instead of a
standard soft reset. Install your app, then press and hold the Up
scroll/nav button and do a pin reset. Keep holding the Up scroll button
until you get to Prefs. This will reset the device without sending the
sysAppLaunchCmdSystemReset code to all apps. You can tell the "no-notify"
reset was successful because you will not see the Tungsten logo and music
tone after the initial Palm Powered screen -- it will just go right into
Prefs.
Now, check if your app is deleted or not. If not, then you can surmise that
something in the sysAppLaunchCmdSystemReset handler for your app or any
other app on the device is causing the prc database to be deleted.
Then do a regular soft reset to return to normal operations. The
"no-notify" mode should not be used for regular operations because it
prevents many system libraries and utilities from being loaded properly.
--
For information on using the PalmSource Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/support/forums/
