I was finally able to debug on my T|X and, even though this has probably been discussed before, I thought I'd summarize what I did.
First off, I was able to put the T|X into console mode with the shortcut-dot-2 sequence. This was working all along, but I had forgotten that the only indicator is that blinking pixel in the lower right corner. So I was OK there. The real problem was that my CW9 was not able to access the USB port. Guru Ben Combee wrote a KB article about putting the USBPort.dll file into a different location, but what he wrote was a bit confusing since he said to use a folder under "My Documents" that I'd never heard of. The more accurate solution is to say to move that file to your Palm Desktop root folder, wherever that happens to be. I have not changed my Palm folder since I started out with my IIIx, so it is still C:\Palm for me and I have always upgraded into that folder. The other apparently important thing to do is to *move* the DLL there, not simply *copy* it. My USBPort.dll was in the Win/System32 folder, so I moved it to C:\Palm and rebooted to get everything cleaned up. So now CW9 and Hotsync are both working correctly, talking to my T|X (but not at the same time!). Just thought I'd clear this up in case anyone else is having this type of problem. The other thing to note is that my need for this was due to the T|X itself behaving differently from the Simulator in regards to events posted by the 5-way control. The problem was easy to fix, but hard to see without the actual device debugging! -- Doug G -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
