Stefan, I'm looking into this so I can see why it works fine for me, but not for you guys. 1. What baud rate are you using? 2. Are you sending as well as receiving bytes in Raw IR? 3. Do you open and close the port on a regular basis or keep it open all the time? Regards John
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stefan Kolb Sent: 10 March 2006 16:05 To: Palm Developer Forum Subject: Re: Treo 650 Raw IR Hello, I have the same situation on my treo 650, but only since I updatet to firmeware 1.20 ENA. With the version 1.13 ROW it works ok. I wil also be happy if someone has a solution to solve the problem. Regards Stefan "Jesse Hillman" <[EMAIL PROTECTED]> schrieb im Newsbeitrag news:[EMAIL PROTECTED] > I have an existing raw IR app that works fine on older Palms. The > problem with the Treo and Zire 72 is that the first character I receive is garbaged up. If I send 123, then pause for a second then 567, the Treo receives, %23 #67 (where % and # are random 8 bit hex chars). The first character is always garbage. If I send continuously to the Treo all the data seems to be ok. Any delay between characters and I get a garbage character in place of the first character I should receive. > > I am using the new serial manager at 9600 baud. We have been using > the application to communicate with the MicroChip 2122 for 2 -3 years now with no problems. The Palm models we normally use are the 500 series, the Symbol 1800, and the Meazura. > > Anyone have any thoughts? > > Thanks, > Jesse > -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
