Hey Regis,
Do you have a mac?
Leandro
Nikolai Filipov escreveu:
Hello again, Regis!
Well, if you have a Mac, you can use Missing Sync
http://www.markspace.com/missingsync_palmos.php
Also, if your PC/laptop has an infrared port, you can set up Mocha PPP
to use infrared to connect.
Nikolai F.
At 12:47 17.3.2006, you wrote:
Hello Nikolia,
I tried Plug2Net, but I've to install a PRC on Palm to put the
solution to work....
It's a really problem to me do that. Softick is very transparent,
because there is no software installation on device to put the things
to work...
Mocha is not viable because I'm using Palm Z22 (that does not
have a serial interface).
Any other idea??
Thanks!
Regis
Nikolai Filipov wrote:
Hello, Regis!
There is Mocha PPP (serial connection only)
<http://www.mochasoft.dk/other.htm>http://www.mochasoft.dk/other.htm
Also, Plug2Net
<http://www.corsoft.com/plug2net.asp>http://www.corsoft.com/plug2net.asp
Nikolai Filipov
Hands High
At 15:39 16.3.2006, you wrote:
Hello!
There is any software similar to Softick that I can use with
my Palm Z22?
The Z22 and softick does not work very well...
(<http://www.softick.com/support/index.php?random=2004875753&request_id=3547>http://www.softick.com/support/index.php?random=2004875753&request_id=3547)
Basically I nedd a software that can make a bridge between my
Palm and the internet using a PC.
So, When I open a socket connection on my Palm connected using
a cable to my PC, I can acess the internet.
Thanks!
Régis Melo
--
For information on using the PalmSource Developer Forums, or to
unsubscribe, please see http://www.palmos.com/dev/support/forums/
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.1.385 / Virus Database: 268.2.4/282 - Release Date: 15.3.2006
--
For information on using the PalmSource Developer Forums, or to unsubscribe,
please see http://www.palmos.com/dev/support/forums/
