I have seen this problem before on a few different devices, it's in the archives somewhere. I never found a workaround for any of the devices I was using. We just had to live with 2 seconds instead of 1 :(
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of scarranza Sent: 03 May 2006 16:05 To: Palm Developer Forum Subject: can't run 1 second almsetalarm on Palm TX and Emulator I am pretty new to Palm OS. I am creating an application to collect data via serial port at fixed intervals. I used the almsetalarm and I linked my send/receive procedure to that. The program works well with rates 2 seconds and up, but when I try to set 1 second, it seems to be setting an immediate alarm (i.e., the scan keeps going as fast as the Palm can handle) The application works perfectly on the Garnet simulators with the 1 second rate, so I don't understand why it does not work with the TX and the Emulator. Does anyone know of this problem, or have any suggestions? Side note - I tried a few times to transfer the TX ROM to use it with the emulator, but no luck. Anybody knows if there is a TX ROM available online, or if it is compatible with the emulator? -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/ -- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
