2006/6/28, krauss <[EMAIL PROTECTED]>:
have You some Code like this?
#define UIMAX 4294967295
Ralf
Ton van Overbeek schrieb:
> On 2006-06-28, marco roner <[EMAIL PROTECTED]> wrote:
>
>>------=_Part_13171_31388786.1151478044004
>>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>Content-Transfer-Encoding: 7bit
>>Content-Disposition: inline
>>
>>I don't know , it' an assembler messages
>>this is what write the console when I make built
>>
>>m68k-palmos-gcc -c -D__PALMOS__=0x05000000 -I"C:/Programmi/PalmSource/Palm
>>OS Developer Suite/PalmOSTools/include/stlport" -O0 -g -fexceptions -UNDEBUG
>>-Wall -palmos5r4 -o src/Strip/Strip.o ../src/Strip/Strip.c
>>/cygdrive/c/DOCUME~1/marco/IMPOST~1/Temp/ccLJYs9F.s: Assembler messages:
>>/cygdrive/c/DOCUME~1/marco/IMPOST~1/Temp/ccLJYs9F.s:3469: Error: Signed
>>.word overflow; switch may be too large; 37784 at 0xfa
>>/cygdrive/c/DOCUME~1/marco/IMPOST~1/Temp/ccLJYs9F.s:3632: Error: Signed
>>.word overflow; switch may be too large; 37784 at 0x224
>
>
> Source file is ../src/Strip/Strip.c. As far as I can tell there are no
> large switch statements in that file.
> I have not tried to import it in PODS.
> I have my own Cygwin installation including prc-tools and used the PODS
> custom install to point it to my own Cygwin installation.
> My advice is to try to compile it with the command line tools outside PODS
> using configure and make. As far as I know the PalmOSCygwintools should
> contain everything you need.
> Good luck.
>
> Ton van Overbeek
>
--
For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
-- For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
