Title: Message
To purposely enter Debug mode on any PalmOS device, you hold the hardware "Down" button, initiate a reset, and continue holding the Down button for several more seconds.
 
Have you considered the possibility that your Down button is stuck? 
 
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kasny J.
Sent: Friday, August 04, 2006 4:35 AM
To: Palm Developer Forum
Subject: RE: Flash OS

There’s propably bigger problem. Hard reset doesn’t work unfortunatelly. Cold reset, warm reset, zero-out reset…, nothing… I also disconnect the battery for 1 week. And same result. Second logo, then stuck.

I think this Palm is completely in the sh.t. But thank You for help.

 

Dmitry: It sounds not so good. Do You think, is it question of software tool only, or also hardware kit? I found a tool for flash the Treo. I think it is almost same hw as TX.

 

 

 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roger Stringer
Sent: Thursday, August 03, 2006 10:47 PM
To: Palm Developer Forum
Subject: Re: Flash OS

 

At 04:17 AM 8/3/2006, you wrote:

Subject: Flash OS
From: "zozombi" <[EMAIL PROTECTED]>
Date: Wed,  2 Aug 2006 13:09:10 -0000
X-Message-Number: 4

Hi,
sorry for little off-topic.
My TX is in stuck. Everything what I can do, is get to the debug mode. Is it possible to re-flash OS in this mode? Or how to repair it? Any ideas?


Have you done a hard reset yet.  That's the one that then asks you if you want to delete all files, and when you say yes and then have to reselect your language choice.

The problem is most like an errant program that doesn't ignore the RESET launch code, most likely your program!


--
For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/


--
For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
Roger Stringer
Marietta Systems, Inc. (www.rf-tp.com)

--
For information on using the PalmSource Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/

Reply via email to