I must apologies to the group. There is an error in the model. I corrected it and mike will upload the model shortly.
I inadvertently overlapped two parts that form the breach block. Thus the drawing is wrong and a part is missing. I have corrected this on the latest version and added a picture of a completed model as a cover. The presence of the cover is an indication of having the corrected model. The scales 1X24, 1X32, 1X48, 1X72, 1X100, 1X150, and 1X200 are correct for my printer page setup in Corel Draw 10. Depending upon the border size on you're printer the scale may be off a bit. The plan was for using 8.5X11 Letter Size paper. I built the first cut with heavy ~110 lb card stock. The prototype in the pictures is on 65 lb card stock. I would suggest 32 lb paper for the versions from 1X72 to 1X200. That is if you can see that well and you're hands don't shake like mine. I hope you all have a Happy and Prosperous New Year. Jim James J. Hairston 8559 Birch Creek Rd. Keller Tx. 76248 H: (817) 337-4183; E-Mail: <mailto:[email protected]> [email protected] <mailto:[email protected]> <mailto:[email protected]> --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/Papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
<<inline: image001.gif>>
