[email protected] wrote: > > Hi Frank, > > I bought some ceramic paper. If you check a little further you will > see that they use it in the top of really huge furnaces. They line > the top where the exhaust usually exits. It is a form of refactory. > > I bought some to use as an insulater for a pulse-jet powered cardstock > model.
Seriously?!? And have you got pictures... :) Mike (who keeps thinking that he *really* should finish the pulsejet build that he started many moons ago...) It is made of several fibers that are oriented in different > directions with some kind of weave to it. They are rated at Max temp > = 2600degrees F with a 800/hour burn thru rate. I have several wide > format printers/plotters that I would not even attempt to print on. > The little "star"wheels that grip the paper would clog up with the > fiber. > > Hope this helps! > Mike > > On Mar 1, 5:21 am, frankmcneill <[email protected]> wrote: >> Go tohttp://tinyurl.com/cz4lrqfor information about 3M's flame >> resistant continuously extruded, spun bonded ceramic paper. >> Can it be printed? Maybe, Go tohttp://tinyurl.com/for information >> about a company that does digital laser printing on glass and ceramic >> dinnerware. ink jet printing might not work because ceramic paper >> probably does not absorb water or other solvents. >> >> Frank > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/Papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
