Help Claudio or Skip !!! I'm putting together the 1976 Camaro and have the floor pan built, door inners on and have put together the dashboard ready for installation. Now this is where I've sort of hit the wall a bit. The dash fits across the pan at the top and attaches to the pylon on either side, there are 3 tabs on each pylon and I can see that the bottom and next up tab fit to the parts C7 (bottom strip) and C6 (glovebox ?) but what happens with the large flat tab at top of the pylons ?. and the parts C2 and C6 have triangular wings sticking out, do these fold under and are glued at 90 degrees to the flat part C1 or are they connected some other way and do they simply sit on top of the large flat tab on the top of the pylon ?.. All the instructional pics are mainly from behind and not on an angle and it's a little difficult to make out how the dash fits properly. Hoping you can help me because this is one biggggg model and so far has been a pleasure to build and I'm looking forward to seeing the looks on all my mates faces when they scope this one for the first time.
Bones --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/Papermodels?hl=en -~----------~----~----~----~------~----~------~--~---
