Thanks for the photo Bob... I have some but not all.
From: Paul McCool <[email protected]>
Subject: [Papermodels II 39704] Re: Modeling tools I use:
To: [email protected]
Date: Friday, August 28, 2009, 2:43 PM
I have those plus an odd short knitting needle I snitched from the wife. I use it for rolling tight curves.
Paul M.
----- Original Message -----
Sent: Thursday, August 27, 2009 6:59 PM
Subject: [Papermodels II 39699] Modeling tools I use:
This is for the new comers to this hobby since us old guys are much set in our ways.
The model shown is from Fiddlersgreen < http://www.fiddlersgreen.net/ > and printed two parts pages onto one letter size page. It is the Miss America P-51 Mustang. 
1. 6
inch steel rule.
2. Pallet, originally an end cap from a frozen concentrated juice container.
3. Scribing tool for applying glue in hard to reach areas.
4. Dental tool for applying glue.
5. Xacto knife with #11 blade.
6. Sanding stick different grades.
7. Sharpening stone to keep a point on the Xacto blade.
8. Long nose tweezer.
9. Clamp. Shown here holding the tweezer closed.
10. So far, my favorite paper modeling glue.
Not shown: I use water colors for those cut edges on paper/card parts.
Hope this helps,
Bob Penikas
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Papermodels II" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/papermodels?hl=en
-~----------~----~----~----~------~----~------~--~---
|
