Another source for paper that can be trimmed to A4 is: https://store.officeworld.com/
Select manufacturer - Pacon Choose: Paper Choose: Art & Drafting Materials GoTo: Page 2 - Tagboard Then scroll down to: PAC5211 by Pacon Heavyweight Tagboard, 12 x 9, White, 100/Pack @ $5.58/ PK is close to 252 gsm and might be too thick for your printer. PAC5281 by Pacon Medium Weight Tagboard, 12 x 9, White, 100/Pack @ $4.79/PK is close to 65# / 177 gsm cardstock. Works good. There is manila tagboard too, so be careful. As Mike mentioned you might have to trim 1/2" off of one long side to go through the printer. They also offer paper in larger sizes so if you have a large format printer it might be a source. I have ordered from them and received prompt service. On Nov 10, 7:26 pm, reznap2002 <[email protected]> wrote: > My 4 year old grandson loves yellow camaros with black stripes. I > found the one on paperinside that is just right. I have not done any > paper models in sometime. When I printed out the first sheet I lost > some of the detail at the bottom of the page. I know you have to > download and then set to fit page on printer. However, it did not > work. What am I forgetting to do? -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
