On Wed, Feb 9, 2011 at 12:04 PM, <[email protected]> wrote: > Clear canopy enhanced Fiddlersgreen Bearcat. Fiddlersgreen.net > Photos: > #0045 Wingspan six and 3/4 inches. > #0020 Cockpit area on fuselage is covered with black paper. Two clear > canopies are shown. I tried the suggested quick double packing tape method > on the left one then played with gluing clear thin plastic onto the > underside of a cut out frame. Both would work nicely. > #0028 A cone was glued to the engine disk to help the prop clear the engine > cowling. Prop assembly: The propeller blades are reinforced with straight > wire. The large cardboard disc is glued inside the cowling, the smaller one > is glued onto the propeller straight pin at the aft end of the brass tube. > #0033 Finished model. The canopy frame was first painted with enamel then > sanded after drying and finally touched up with acrylic paint. > Bob Penikas
Outstanding work as always, Bob! :-) -- Mike Hungerford http://www.chthulhu.com/ -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
