Really nice work Bob... Bob D... --- On Wed, 2/9/11, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]> Subject: [Papermodels II 44059] Clear canopy enhanced Fiddlersgreen Bearcat. To: [email protected] Date: Wednesday, February 9, 2011, 12:04 PM Clear canopy enhanced Fiddlersgreen Bearcat. Fiddlersgreen.net Photos: #0045 Wingspan six and 3/4 inches. #0020 Cockpit area on fuselage is covered with black paper. Two clear canopies are shown. I tried the suggested quick double packing tape method on the left one then played with gluing clear thin plastic onto the underside of a cut out frame. Both would work nicely. #0028 A cone was glued to the engine disk to help the prop clear the engine cowling. Prop assembly: The propeller blades are reinforced with straight wire. The large cardboard disc is glued inside the cowling, the smaller one is glued onto the propeller straight pin at the aft end of the brass tube. #0033 Finished model. The canopy frame was first painted with enamel then sanded after drying and finally touched up with acrylic paint. Bob Penikas -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en. -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
