This is the problem, when I use the transformation section on the "Display tab" the scale will be applied to both, the geometry and the annotation (with "Show cube axes") but I see on the "Information tab" the original values on the Bounds section. And this values should be used for the annotation not the transformed values, which are used for display. If I want the scale for both I can use the transform filter and manipulate the data directly but that is not what I want.
Karl -------- Original-Nachricht -------- > Datum: Wed, 25 Mar 2009 07:25:31 -0400 > Von: Utkarsh Ayachit <[email protected]> > An: blende32 <[email protected]> > CC: [email protected], [email protected] > Betreff: Re: [Paraview] Transform surface independently from axes and boxes > Hopefully, I understand this correctly now. Just go to the "Display > tab". If you scroll lower, you'll see a transformation section. Apply > the scale there. The scale will be applied to both the geometry as > well as the annotation, while the annotation will keep on showing > original data values. > > Utkarsh > > 2009/3/25 blende32 <[email protected]>: > > Hi, > > > > the problem still exists. It seems not possible to scale only for > display an > > let the > > annotation (Show cube axes) on unscaled values (the original values), > which > > are not transformed. If I use the transform filter I manipulate the real > > data an then > > of course the annotation uses also the transformed values. I only will > swage > > the > > surface for the display and screenshots, but the axes annotations should > > show the > > real values. Is this not possible? I use no geometry. The data are > > temperatures in Z, > > height in y and time in X. > > > > Karl > > > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ > > From: [email protected] > > To: [email protected] > > Date: 08:31:33, 03.24.2009 > > Subject: Re: [Paraview] Transform surface independently from axes and > boxes > > ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ > > > > > > > > Hi, > >>> > >>>I don't know if this possible. Maybe with the calculator : what about > if > >>> you give as point data the original point coordinate, and then apply > the > >>> transform ? PointData should not be modified. This is a brief idea : I > even > >>> don't know how to set the axes to plot the point data instead of the > >>> geometry... > >>> > >>>Good luck ! > >>> > >>>Jerome > >>> > >>> > >>>2009/3/24 blende32 <[email protected]> > >>> > >> > >> Thank you for the explanation, but maybe I described the problem not > >> exactly. > >> >>I did not want to plot the surface of the transformed data apart > from > >> >> the outline > >> >>and the axes of the original data. I will to get a nonproportional > plot. > >> >> The bounds > >> >>of the data are X(0...3000) Y(0...250) Z(20...31) and this should be > >> >> plotted in a cube > >> >>with the same length of each edge with axes labeled of the original > >> >> data. With the > >> >>"Transform" filter I did many trials but without success. > >> >> > >> >>Karl > >> >> > >> >> > >> >>~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ > >> >>From: [email protected] > >> >>To: [email protected] > >> >>Date: 14:08:16, 03.23.2009 > >> >>Subject: Re: [Paraview] Transform surface independently from axes and > >> >> boxes > >> >>~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >>>>Apply the "Transform" filter to your data to transform it. However, > >> >>>> also turn on the visibility of your original data source i.e input > to > >> >>>> the transform filter, switch the representation type to outline > and > >> >>>> then show cube axes etc. on that original data. > >> >>>> > >> >>>> Utkarsh > >> >>>> > >> >>>> On Sat, Mar 21, 2009 at 5:05 PM, Karl Muster <[email protected]> > >> >>>> wrote: > >> >>>> > Hello, > >> >>>> > > >> >>>> > I'm new in using paraview for visualisation and I need some help > >> >>>> > for scaling or transforming surfaceplots independently from axes > and boxes. > >> >>>> > The data about X, Y and Z are from different dimensions, thats > why I have to > >> >>>> > transform or scale it, but the axes should show the real values > and should > >> >>>> > not also be scaled. > >> >>>> > > >> >>>> > Thank you for help. > >> >>>> > -- > >> >>>> > Aufgepasst: Sind Ihre Daten beim Online-Banking auch optimal > >> >>>> > geschützt? > >> >>>> > Jetzt absichern: https://homebanking.gmx.net/[email protected] > >> >>>> > _______________________________________________ > >> >>>> > Powered by www.kitware.com > >> >>>> > > >> >>>> > Visit other Kitware open-source projects at > >> >>>> > http://www.kitware.com/opensource/opensource.html > >> >>>> > > >> >>>> > Please keep messages on-topic and check the ParaView Wiki at: > >> >>>> > http://paraview.org/Wiki/ParaView > >> >>>> > > >> >>>> > Follow this link to subscribe/unsubscribe: > >> >>>> > http://www.paraview.org/mailman/listinfo/paraview > >> >>>> > > >> >>>> > >> >> > >> >>_______________________________________________ > >> >>Powered by www.kitware.com > >> >> > >> >>Visit other Kitware open-source projects at > >> >> http://www.kitware.com/opensource/opensource.html > >> >> > >> >>Please keep messages on-topic and check the ParaView Wiki at: > >> >> http://paraview.org/Wiki/ParaView > >> >> > >> >>Follow this link to subscribe/unsubscribe: > >> >>http://www.paraview.org/mailman/listinfo/paraview > >> >> > > > >>> > > > > > > _______________________________________________ > > Powered by www.kitware.com > > > > Visit other Kitware open-source projects at > > http://www.kitware.com/opensource/opensource.html > > > > Please keep messages on-topic and check the ParaView Wiki at: > > http://paraview.org/Wiki/ParaView > > > > Follow this link to subscribe/unsubscribe: > > http://www.paraview.org/mailman/listinfo/paraview > > > > -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger01 _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
