If I have a cluster of machines and I am trying to run paraview. I have 2 GPUs on one machine and I am running 2 X servers one on each of the GPU. I want to run 2 pvserver instances one on each GPU and have then distribute the rendering load on the GPUs. The Paraview Client GUI runs on another machine and needs to accept connections from the two servers. Is this possible with the 3.4.0 version of Paraview ? It was possible with the 2.x series, but I am unable to get this running with the 3.4 series.
If this is my servers.pvsc file and viz3g0 and viz3g1 show up when I use the File->Connect gui. <Server name="viz3g0" resource="cs://viz3:11111" owner="site"> <ManualStartup /> </Server> <Server name="viz3g1" resource="cs://viz3:11112" owner="site"> <ManualStartup /> </Server> I run 2 server using $ mpirun -np 1 -e DISPLAY=:0 pvserver --client-host=viz2 --server-port=11111 & $ mpirun -np 1 -e DISPLAY=:1 pvserver --client-host=viz2 --server-port=11112 But I can only choose viz3g0 or viz3g1 from the GUI, but not both. If I get viz3g0 to connect and then select viz3g1, viz3g0 is disconnected. How does one achieve getting multiple servers to connect to a single client ? Thanks, Manju _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
