Hi Eric, I just tried reversing the axis direction, and using my new, experimental line chart code. Simply setting the y axis minimum to 1.0 and the maximum to -1.0 did the right thing. That was very encouraging, these charts will be making their way into VTK and ParaView once they are ready.
Marcus On Friday 30 October 2009 15:28:30 Eric Allison wrote: > Thanks for your replies. This example (from ensight) is somewhat ugly, > but indicative of what I am after: > > http://legacy.ensight.com/products/cpplot.html > > > -eric > > On Oct 30, 2009, at 11:29 AM, Marcus D. Hanwell wrote: > > On Friday 30 October 2009 14:18:03 Moreland, Kenneth wrote: > >> Uh... I don't think any of us have thought of that particular plot > >> configuration. Someone at Kitware should make sure that this design > >> consideration filters its way to Marcus. > >> > >> -Ken > >> > >> > >> On 10/28/09 10:31 PM, "Eric Allison" <[email protected]> > >> wrote: > >> > >> Apologies if this is a dumb question - I'm investigating Paraview > >> as a > >> replacement for Tecplot, and one of the things I'd really like to do > >> is take Cp slices on CFD geometries. I figured out how to make an XY > >> plot of the slice data, but can't for the life of me figure out how > >> to > >> reverse the Y axis so that Cp displays the way aero people like to > >> see > >> it. (smaller numbers at the top, larger at the bottom). > >> > >> Any help would be appreciated. > > > > I saw the message, what I am doing should be able to accommodate > > this type of > > layout, I will test this out later just to confirm. So something > > akin to > > setting the minimum Y value to 5.0 and the maximum Y value to 0.0? > > > > Any example plots you may be able to point out would help me. > > > > Marcus > -- Marcus D. Hanwell, Ph.D. R&D Engineer, Kitware Inc. (518) 881-4937 _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
