Yes, you will have to set the client host to the machine your client is actually on, olivegarden.
If you are launching the ssh command from the GUI, I believe you can use the special string %PV_CLIENT_HOST% and it will be replaced with your clients hostname. -Ken On 3/3/10 11:13 AM, "Vishwa" <[email protected]> wrote: Hi, I have had a terrible time compiling paraview to use the pvsever on our cluster. Not have privileges made it a little harder as I had to install a local mesa library, cmake, qt4. We finally compiled it and it ran on the head node and we could see the main screen.. After a few time of trying, it started crashing with a segmentation fault error. I have compiled it as debug version.. and yet can't get any info when i run it through gdb. Finally i thought i will just run the pvserver on the headnode (hpc4.iastate.edu <http://hpc4.iastate.edu> ) and when started it, i got the message waiting for client.. on my laptop , i configured a server and it was of the type client/server reverse... and the port was 11111 and the command is as follows ssh -i /home/dagarshali/.ssh/id_rsa.pub [email protected] pvserver --reverse-connection --server-port=11111 --client-host=localhost here i would like to mention that the hostname of the laptop is olivegarden.. i am not sure if i have to leave it as localhost in the above line or replace that with olivegarden? when i try to connect, i get the following error message ERROR: In /home/vishwa/vishwa/OpenFOAM/ThirdParty-1.6.x/paraview-3.6.1.old/Servers/Common/vtkProcessModule.cxx, line 708 vtkProcessModule (0x5c14f0): Server Error: Could not connect to client and the path in the error is on the hpc4.iastate.edu <http://hpc4.iastate.edu> Any help? vishwa **** Kenneth Moreland *** Sandia National Laboratories *********** *** *** *** email: [email protected] ** *** ** phone: (505) 844-8919 *** web: http://www.cs.unm.edu/~kmorel
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
