Please add that to the bug tracker. It is a known limitation that I thought we were going to fix but it apparently slipped through the cracks.
The workaround (which is an unfortunate one) is to use the calculator to add an array. David E DeMarle Kitware, Inc. R&D Engineer 28 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-371-3971 x109 On Thu, Apr 22, 2010 at 5:17 PM, David Doria <[email protected]> wrote: > If you make a source (I tested with a cone source), split the view to > show a spreadsheet view, and select a point on the cone, nothing shows > up in the spreadsheet view. In fact, under Attribute the only option > is FieldData. If you do something so that the points get PointData > (e.g. GenerateSurfaceNormals), you can then select a point and see the > normal, coordinate, and point ID of the selected point. Is there a > reason for this behavior? Or could it be changed so that the > coordinate and ID could be seen even if the object doesn't have any > PointData? > > Thanks, > > David > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://www.paraview.org/mailman/listinfo/paraview > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
