Phil,
It is a bug after all. Would you mind filing a report?
http://www.paraview.org/Bug
these steps can be used to reproduce.
1) start pv
2) enable parallel projection
3) make a cone source with the default values
4) change the view noticeably: rotate, shift, move out, etc, etc ...
5) from the camera dialog, save the camera config
6) close pv
7) start a new pv
8) make a cone source
9) from the camera dialog, load the camera config you saved in step 4
thanks
Burlen
Phil Tiller wrote:
Hi Burlen,
Thanks for your reply. I think I've sorted things out now based on your
reply. First of all, I wasn't aware of a new version (I was using
v3.8.0) and so I've downloaded that. I don't think that was the problem
though.
I've been playing around with the saving of the camera settings and have
now found that it works fine so long as I have the 'Use Parallel
Projection' turned off in the View Settings. I can save a view, exit
and read in the same or a different case and it all works fine.
If I save a view when 'Use Parallel Projection' is turned on and then
exit, re-read etc then the camera settings do not work and whilst the
re-loaded view is correctly orientated, the zoom is all wrong. Turning
'Use Parallel Projection' on and off does not fix this.
My platform is AMD 64bit running openSuse 11.1 but I get the same
problem on Windows 32bit. I'm not sure if this is a bug or if it just
hasn't been coded to work with parallel projection.
Regards,
Phil
-----Original Message-----
From: burlen [mailto:[email protected]]
Sent: 20 October 2010 18:44
To: Phil Tiller
Cc: [email protected]
Subject: Re: [Paraview] Saving Views
Phil,
It could be a bug but... I am unable to reproduce it myself using pv
3.8.1. If it's not a bug then it could be confusion of how this feature
works. just to verify could you try the following:
1) start pv
2) make a cone source with the default values
3) change the view noticeably: rotate, shift, move out, etc, etc ...
4) from the camera dialog, save the camera config
5) close pv
6) start a new pv
7) make a cone source
8) from the camera dialog, load the camera config you saved in step 4
I have just done these steps on my workstation with PV 3.8.1 and the
view was restored with no problem. If you still experience the problem
using the above steps you should file a bug report on
http://www.paraview.org/Bug with details about your platform and steps
to reproduce the situation.
Burlen
On 10/20/2010 09:33 AM, Phil Tiller wrote:
Hi Burlen,
Thanks for responding to my message.
That doesn't seem to work. I can save the view in the camera settings
(either as a configured button or to a file) and then when I want to
use it again (either in the same session or after exiting and
re-reading) it doesn't work. This happens when I do it on the same
model as well. The view is restored in the correct position and angle
but not the correct zoom.
Regards,
Phil
-----Original Message-----
From: burlen [mailto:[email protected]]
Sent: 19 October 2010 18:48
To: Phil Tiller
Cc: [email protected]
Subject: Re: [Paraview] Saving Views
Hi Phil,
Saving (and re-applying) the camera settings should do what you need.
Are the two datasets the same size?
Did you apply the saved settings after loading the second dataset?
Burlen
On 10/19/2010 09:12 AM, Phil Tiller wrote:
Hi,
This must be very simple in Paraview but I can't seem to work it out.
I'd like to save a view for one dataset so that I can then go and get
another dataset and present the new data at exactly the same
viewpoint thus making it easy to see the differences.
I thought I could do it using the 'save' function in the Camera
positions menu but this doesn't quite work. When I read the next
dataset in and load the view, the zoom and positioning are wrong,
even though the actual view angle may be correct.
How do I do this?
Thanks,
Phil
---------------------------------------------------------------------
-
--
/IMPORTANT: This message is private and confidential. If you have
received this message in error, please notify us and remove it from
your system. Unless otherwise stated, the statements contained herein
are those of the individual and not the Company and no legal
responsibility is accepted by the Company for such statements.
Messages sent to and from us may be monitored. Registered office:
Lola Cars International Limited, Glebe Road, Huntingdon, Cambs, PE29
7DS, UK. Registered in England No 3415853./
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
______________________________________________________________________
This email has been scanned for viruses by www.epagency.net If you
consider this email spam, please forward it to [email protected]
______________________________________________________________________
______________________________________________________________________
This email has been scanned for viruses by www.epagency.net
If you consider this email spam, please forward it to [email protected]
______________________________________________________________________
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
