Wayne Wu wrote:
We have an inhouse university unstructured software named aironum. I simply added a table id(ns) with id= 0 at interior points and a different value for each boundary condition. I test for x = xmin (rectangular exterior boundaries case) and set id = 5 (my inflow identifier). Saturn is an open source code so you could add it rather easy.Hello Stephen,I have the same problem. I use SALOME to produce mesh, in which I define groups for CFD solvers, such as Code_Saturne or Elmer. Thereby, I don't know the ID values which correspond to the different boundaries. What software do you use?
Hope this helps a little, if not, ask more questions. Stephen
Thanks for your advices. Best regards, Wayne On 8 March 2011 14:49, Stephen Wornom <[email protected]> wrote:Arnaud Candaele wrote:Hi, I am a new paraview user, and have a quite simple question about it. I have a cfd simulation of an air flow, let's say just walls+inlet+outlet. I exported the converged result as an Ensight file, to read it with paraview, and it works fine. I just would like to know if it is easily possible to select my outlet, and ask paraview to compute, for example, the average velocity magnitude on that face ? I guess I should use something like the "integrate variables" filter, but how do I select that outlet face (which is defined in my CFD program, but doesn't seem available in paraview...) ? Thank you, Arnaud _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraviewI have an id table, for example, id= 4 = outflow. Then I 1) extract a surface 2) connectivity 3) threshhold min= 4 max= 4 4) data analysis > integrate varaibles Hope this helps. Stephen -- [email protected] 2004 route des lucioles - BP93 Sophia Antipolis 06902 CEDEX Tel: 04 92 38 50 54 Fax: 04 97 15 53 51 _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
-- [email protected] 2004 route des lucioles - BP93 Sophia Antipolis 06902 CEDEX Tel: 04 92 38 50 54 Fax: 04 97 15 53 51
<<attachment: stephen_wornom.vcf>>
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
