Hum... I didn't get what you told. The ruled surface filter works for 3D
polylines, as soon as you have at least two of them. I just built a
screw in ParaView with a LineSource, a SplineSource and the
RuledSurfaceFilter.
I am curious about the context in which it fails. Is it possible for you
to share the polylines and the expected result?
Jerome
On 12/05/2011 02:28 PM, Fred Fred wrote:
It is not a reliable solution to my problem because it works in 2D and
my contours are all but almost planars, which makes it very hard to
find an appropriate transform.
I finally wrote my own algorithm and, waiting to find a bad use case
:-), it works for the time being.
Anyway thx for trying to help me.
------------------------------------------------------------------------
Date: Thu, 1 Dec 2011 11:52:14 +0100
From: [email protected]
To: [email protected]
CC: [email protected]
Subject: Re: [Paraview] Creating a ribbon
Hi,
You can easily add the vtkRuledSurfaceFilter from VTK in ParaView. I
already did it in my Peavip stuffs (http://github.com/jeromevelut/Peavip).
If your polylines are in different sources (eg. two different
SplineSources), you'll have to pass them through "Append Geometry"
prior he RuledSurfaceFilter
HTH
Jerome
On 11/29/2011 09:31 PM, Fred Fred wrote:
Hello,
I have 2 polylines and I would like to create a ribbon between
them, ie a triangulation. I did not find any suitable class but I
wonder if I did not miss anything, any help?
_______________________________________________
Powered bywww.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects
athttp://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki
at:http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
--
Kitware SAS
26 rue Louis Guérin
69100 Villeurbanne, France
F: +33 (0)4.37.45.04.15
http://www.kitware.fr
--
Kitware SAS
26 rue Louis Guérin
69100 Villeurbanne, France
F: +33 (0)4.37.45.04.15
http://www.kitware.fr
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
