First, thank you for the quick response I appreciate the input. I took at look at the state file you provided, and my first thoughts are suggesting that the Transform Filter may not provide exactly what I need.
In your example you are using the Animation Control to interpolate parameters of the Transform Filter over time. However I don't believe that any of the functions exposed by the Transform filter will help me actually remove Points along with the data in their associated Data Arrays. In terms of viewing the "Information" tab in the Object Inspector - I have a Dataset which has 2 Points, Several Arrays of Length 2 - and I would like to create multiple filters; each which would contain only 1 Point with Data Arrays of size 1. Would it be helpful if I provided a state file with my test datasets? From: "Deij, Menno" <[email protected]> To: John CTR Mick/ACT/CNTR/FAA@FAA, "[email protected]" <[email protected]> Date: 03/22/2012 12:39 PM Subject: RE: [Paraview] Assistance/Suggestion With Animating Relatively Small Datasets Over Many Timesteps How about using a Transform Filter, possibly using scripting? Not sure if that works with timesteps, but I suppose it can be done. I made the following example for someone on the list recently, that shows animation of a transformfilter: http://markmail.org/download.xqy?id=wjep757breylvtao&number=1 (downloads a state file) dr. ir. Menno A. Deij Software Engineer Maritime Simulation Group MARIN 2, Haagsteeg E [email protected] P.O. Box 28 T +31 317 49 39 11 6700 AA Wageningen T +31 317 49 35 06 The Netherlands I www.marin.nl MARIN news: Exploratory study on the working principles of Energy Saving Devices This e-mail may be confidential, privileged and/or protected by copyright. If you are not the intended recipient, you should return it to the sender immediately and delete your copy from your system. From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Thursday, March 22, 2012 5:13 PM To: [email protected] Subject: [Paraview] Assistance/Suggestion With Animating Relatively Small Datasets Over Many Timesteps This is my first experience posting to the ParaView Mailing List; as well as my first project I am exploring with ParaView. I hope I am posting this question to the correct audience. I am attempting to create an animation of our Solar System - at an extremely high update interval - perhaps plotting the position and velocity of significant solar system bodies over 165 Earth years at a one day interval. Initially I thought I would be able to work with CSV files to define a dataset which includes time, positional coordinates, and velocity vectors. While testing this approach I managed to use the TableToPoints filter to create a visualization of a sample dataset; but I was not able to sequence over the individual timesteps. So in effect you see all the positions a particular planet was at for the entire duration of the dataset. I created a video of this test and made it available online: http://www.youtube.com/watch?v=XLPxx-2Zc9Q Next I thought perhaps the CSV format was a little too general for what I needed, so I read the VTK file format document and migrated over to the XML VTK format. It seems like there is no way to define time sequenced data natively within the file format itself? ParaView expects the user to break the timesteps into individual files - with a numeric indicator in the filename to define the sequence. If I were to take this approach, I could be looking at creating nearly 500,000 individual files to represent the entire duration of time I'm interested in plotting. I feel like there must be a better way to do this. As a small improvement I thought I could at least combine all of the unique solar system bodies (Earth, Sun, etc.), into a single timestep file such as this: (filename: timeseries_2455562.vtu) <?xml version="1.0"?> <VTKFile type="UnstructuredGrid" version="0.1" byte_order="LittleEndian" compressor="vtkZLibDataCompressor"> <UnstructuredGrid> <Piece NumberOfPoints="2" NumberOfCells="2"> <PointData Vectors="Velocity" Scalars="Radius"> <DataArray Name="Time" type="Float32" format="ascii">2455562 2455562</DataArray> <DataArray Name="Radius" type="Float32" format="ascii">6371 696000</DataArray> <DataArray Name="Velocity" type="Float32" NumberOfComponents="3" format="ascii"> -2.982651603443954E+01 -5.304542013817379E+00 -7.226846229160870E-04 0 0 0 </DataArray> </PointData> <Points> <DataArray type="Float32" NumberOfComponents="3" format="ascii"> -2.567030301930377E+07 1.448508985971261E+08 -3.607762965630511E+03 0 0 0 </DataArray> </Points> <Cells> <DataArray Name="connectivity" type="Int32" format="ascii">0 1</DataArray> <DataArray Name="offsets" type="Int32" format="ascii">1 2</DataArray> <DataArray Name="types" type="UInt8" format="ascii">1 1</DataArray> </Cells> </Piece> </UnstructuredGrid> </VTKFile> The idea of this approach was to list all of the scalars and vectors for each corresponding body in a single file. In this example the first listed scalar, vector, or coordinate point, is the Earth while the second set of values indicates the Sun's data. By combining the bodies into a single file I could reduce the 500,000 files required down to some 60,000 files....still undesirable but better. However I would also like to segment the Points once inside the ParaView environment; so I can create a distinct pipeline for each body in the dataset. One application for this would be to allow different Glyph rendering rules for the Sun and the Earth so I can make the Sun...have a Sun texture - and the Earth an Earth texture. After experimenting with this for awhile I found myself trying to implement a Programmable Filter. The filter would take the Unstructured Grid for the given timestep, and given an index, extract the Point, Scalar, and Vector data from its input - then set only those values to the Output Unstructured Grid. I currently have a script that looks something like this: # CELLID 0 = EARTH cellId = 0 # Obtain References To Input/Output Data gridI = self.GetUnstructuredGridInput() gridO = self.GetUnstructuredGridOutput() dataI = self.GetInput() dataO = self.GetOutput() scalarI = dataI.GetPointData().GetScalars() vectorI = dataI.GetPointData().GetVectors() # Initialize Local Storage Arrays newVector = vtk.vtkFloatArray() newVector.SetName(vectorI.GetName()) newVector.SetNumberOfComponents(3) newScalar = vtk.vtkFloatArray() newScalar.SetName(scalarI.GetName()) newPoint = vtk.vtkPoints() newPoint.SetNumberOfPoints(1) newCell = vtk.vtkCellArray() # Lookup CellId References idCell = gridI.GetCell(cellId) idCellType = gridI.GetCellType(cellId) idPoint = gridI.GetPoints().GetPoint(cellId) idScalar = scalarI.GetTuple(cellId) idVector = vectorI.GetTuple(cellId) # Populate New Local Cell Array with CellId Cell newCell.InsertNextCell(idCell) # Populate New Local Point Array With CellId Point newPoint.SetPoint(0, idPoint) # Populate New Local Scalars with CellId Scalar Tuples newScalar.InsertNextTuple(idScalar) # Populate New Local Vectors with CellID Vector Tuples newVector.InsertNextTuple(idVector) # Copy Local Cells, Scalars, Vectors, and Points Into Output Pipeline Data gridO.SetPoints(newPoint) gridO.SetCells(idCellType, newCell) dataO.GetPointData().SetScalars(newScalar) dataO.GetPointData().SetVectors(newVector) The filter does achieve the desired effect for the cellID 0 - but when I switch the value of cellID to 1 (which should refer to the Sun's index) ParaView crashes hard - where I assume I am missing something, possibly requesting something out of bounds in memory. I've been struggling with this problem for a little while now and thought to share my progress here; hopefully there is somebody out there with a little more insight that could help guide me towards either a conclusion with this implementation or a suggestion for a better approach. Essentially - How can one give ParaView Point and Velocity vectors over a vast sequence of time without creating potentially hundreds of thousands of files on disc? Does this Programmable Filter seem like a reasonable approach? Is there a native feature I am missing that does this already? Is there some other file format other than VTK I could use to have ParaView understand this format of data? Any thoughts, comments, or questions will be greatly appreciated. :) Thanks, John
<<image/jpeg>>
<<image/jpeg>>
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
