On Wed, Apr 25, 2012 at 3:04 PM, Pei-Ying Hsieh <[email protected]> wrote: > Hi, David, > > Thanks for the reply! > > I tried Generate Surface Normal first, then, did Integrate Variables. I got > values for "Surface Normal (vector)" "p (scalar)" "U (vector)" ... > > It looks like integrate only sums up each parameter, so that, Surface Normal > and U are still a vector. It does not do U dot A.
You still need the calculator filter to compute the dot product. data->normals->calculator->integrate > > I have also tried Surface Flow. I got two values for Surface Flow, > something like [-3.64248e-6 -3.64248e-6]. Shouldn't it be just one value? > Those two are the same value. It is an artifact of the fact that the information tab typically shows characteristics of whole arrays. In this case you have an array with just one element. Show the output of the filter in the spreadsheet view instead. > Pei-Ying > > ________________________________ > From: David E DeMarle <[email protected]> > To: Pei-Ying Hsieh <[email protected]> > Cc: paraview <[email protected]> > Sent: Wednesday, April 25, 2012 11:17 AM > Subject: Re: [Paraview] calculate flow rate through a "selected" > cross-section? > > Use Generate Normals before the calculator and Integrate Variables after. > > Also try the Surface Flow which I does all three operations at once. > > David E DeMarle > Kitware, Inc. > R&D Engineer > 21 Corporate Drive > Clifton Park, NY 12065-8662 > Phone: 518-881-4909 > > > On Wed, Apr 25, 2012 at 11:09 AM, Pei-Ying Hsieh <[email protected]> > wrote: >> Dear Paraview experts, >> >> I completed a CFD calculations which contains, U (velocity field) and p >> (pressure field). >> I used "extract selection" to select a cross section. I then would like >> to >> calculate the flow rate through this cross section, ie, U dot A. I tried >> to >> use the Calculator function. I saw U in the vector field. Is there a way >> to have A (area, vector field) so that I can do U dot A, then, integrate U >> dot A to have flow rate? >> >> Thanks! >> >> Pei-Ying >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Follow this link to subscribe/unsubscribe: >> http://www.paraview.org/mailman/listinfo/paraview >> > > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
