I was suggesting directly downloading the binaries, not even trying to build the superbuild. Building using superbuild may be trickier, especially since you're getting other build issues with building ParaView itself. If you want to build from source, you'll have to edit the versions.cmake file to use http:// instead of git:// for all git repos.
Utkarsh On Wed, Oct 24, 2012 at 1:00 PM, Joe Borġ <m...@jdborg.com> wrote: > Ok, looking at the superbuild. I'm behind a firewall, so all git commands > need to be over http:// rather than git:// > > Which makefile can I mod this path in? > > [ 90%] Performing download step (git clone) for 'paraview' > Initialized empty Git repository in > /cfd/software/ParaView/ParaView-3.14.1-SuperBuild/build/paraview/src/paraview/.git/ > error: RPC failed; result=22, HTTP code = 407 > > > > Regards, > Joseph David Borġ > http://www.jdborg.com > > > On 24 October 2012 16:01, Utkarsh Ayachit <utkarsh.ayac...@kitware.com> > wrote: >> >> This include libXt.so and include files such as >> /usr/include/X11/Core.h. On debian-based systems, it's available as >> the package "libxt-dev". Also you can try the nightly binaries >> directly, if you don't want to build from source. The instructions to >> download the binaries are: >> http://paraview.org/Wiki/ParaView/Superbuild#Obtaining_the_source >> >> On Wed, Oct 24, 2012 at 10:47 AM, Joe Borġ <m...@jdborg.com> wrote: >> > Hi guys, sorry to keep finding problems, but I'm stuck here: >> > >> > X11_Xt_LIB could not be found. Required for VTK X lib. >> > >> > Can you give me an example of a lib that should be in there so I can >> > search >> > for that to get the dir please? >> > >> > >> > >> > Regards, >> > Joseph David Borġ >> > http://www.jdborg.com >> > >> > >> > On 23 October 2012 13:55, Utkarsh Ayachit <utkarsh.ayac...@kitware.com> >> > wrote: >> >> >> >> Joe, >> >> >> >> Use the latest revision of the wiki page to build the source from >> >> git-master (http://paraview.org/Wiki/ParaView:Build_And_Install). >> >> >> >> Utkarsh >> >> >> >> On Tue, Oct 23, 2012 at 7:18 AM, Joe Borġ <m...@jdborg.com> wrote: >> >> > Thanks for the info Leo, >> >> > >> >> > I am, however, having trouble building the source that I've >> >> > downloaded. >> >> > >> >> > Could you point me to any instructions on how to build? >> >> > >> >> > >> >> > http://paraview.org/Wiki/index.php?title=ParaView:Build_And_Install&oldid=46445#On_Unix-like_operating_systems_2 >> >> > doesn't seem to tie up with the files I get. >> >> > >> >> > These are the files I've pulled from Git: >> >> > >> >> > -rw-r--r-- 1 joe.borg root 364 Oct 23 09:43 >> >> > ParaViewConfigVersion.cmake.in >> >> > -rw-r--r-- 1 joe.borg root 2.6K Oct 23 09:43 ParaViewConfig.cmake.in >> >> > -rw-r--r-- 1 joe.borg root 15K Oct 23 09:43 License_v1.2.txt >> >> > -rw-r--r-- 1 joe.borg root 583 Oct 23 09:43 DartConfig.cmake >> >> > -rw-r--r-- 1 joe.borg root 539 Oct 23 09:43 CTestConfig.cmake >> >> > -rw-r--r-- 1 joe.borg root 24K Oct 23 09:43 CMakeLists.txt >> >> > -rw-r--r-- 1 joe.borg root 3.2K Oct 23 09:43 vtkPVConfig.h.in >> >> > -rw-r--r-- 1 joe.borg root 5.0K Oct 23 09:43 cave.pvx >> >> > drwxr-xr-x 5 joe.borg root 4.0K Oct 23 09:54 Examples/ >> >> > drwxr-xr-x 26 joe.borg root 4.0K Oct 23 09:55 Plugins/ >> >> > drwxr-xr-x 13 joe.borg root 4.0K Oct 23 09:56 Utilities/ >> >> > drwxr-xr-x 2 joe.borg root 12K Oct 23 09:56 CMake/ >> >> > drwxr-xr-x 11 joe.borg root 12K Oct 23 09:56 SuperBuild/ >> >> > drwxr-xr-x 5 joe.borg root 4.0K Oct 23 09:56 CoProcessing/ >> >> > drwxr-xr-x 2 joe.borg root 4.0K Oct 23 09:56 CommandLineExecutables/ >> >> > drwxr-xr-x 4 joe.borg root 4.0K Oct 23 09:56 Wrapping/ >> >> > drwxr-xr-x 3 joe.borg root 4.0K Oct 23 09:56 Common/ >> >> > drwxr-xr-x 7 joe.borg root 4.0K Oct 23 09:57 Qt/ >> >> > drwxr-xr-x 24 joe.borg root 8.0K Oct 23 10:01 VTK/ >> >> > drwxr-xr-x 5 joe.borg root 4.0K Oct 23 10:01 ThirdParty/ >> >> > drwxr-xr-x 9 joe.borg root 4.0K Oct 23 10:02 ParaViewCore/ >> >> > drwxr-xr-x 3 joe.borg root 4.0K Oct 23 10:02 Applications/ >> >> > >> >> > Thanks. >> >> > >> >> > >> >> > Regards, >> >> > Joseph David Borġ >> >> > http://www.jdborg.com >> >> > >> >> > >> >> > On 19 October 2012 21:43, Yuanxin Liu <leo....@kitware.com> wrote: >> >> >> >> >> >> Hi, Joe, >> >> >> Berk reminded me that Andy Bauer has put in some fixes for >> >> >> gradient >> >> >> interpolation for pyramids (5a7dc931c54d868). Since your data >> >> >> contain >> >> >> pyramids, this is quite likely the fix for this bug. >> >> >> Leo >> >> >> >> >> >> On Fri, Oct 19, 2012 at 12:05 PM, Yuanxin Liu <leo....@kitware.com> >> >> >> wrote: >> >> >>> >> >> >>> Hi, Joe, >> >> >>> It looks like this was indeed a bug in 3.14.1 but the bug has >> >> >>> been >> >> >>> fixed in the current development branch. I am not entirely sure >> >> >>> which >> >> >>> commit >> >> >>> explicitly did it. >> >> >>> >> >> >>> Leo >> >> >>> >> >> >>> On Fri, Oct 19, 2012 at 5:54 AM, Joe Borġ <m...@jdborg.com> wrote: >> >> >>>> >> >> >>>> Hi, >> >> >>>> >> >> >>>> I am using 3.14.1 64-bit on a single core (if I enable multi-core, >> >> >>>> it >> >> >>>> becomes very unstable). >> >> >>>> >> >> >>>> Adding tets to this small case works, but I've got a bigger duct >> >> >>>> with >> >> >>>> a >> >> >>>> more refined mesh and adding tets don't fix the problem (make it >> >> >>>> better >> >> >>>> though). >> >> >>>> >> >> >>>> See attached PVSM. >> >> >>>> >> >> >>>> >> >> >>>> >> >> >>>> Regards, >> >> >>>> Joseph David Borġ >> >> >>>> http://www.jdborg.com >> >> >>>> >> >> >>>> >> >> >>>> On 18 October 2012 19:00, Yuanxin Liu <leo....@kitware.com> wrote: >> >> >>>>> >> >> >>>>> No, I did not use Tetrahedralize. >> >> >>>>> >> >> >>>>> Are you using the lastest development version? Are you running >> >> >>>>> paraview as a single process? >> >> >>>>> >> >> >>>>> Do you mind saving a state file of your session and post it? >> >> >>>>> >> >> >>>>> thanks! >> >> >>>>> >> >> >>>>> Leo >> >> >>>>> >> >> >>>>> >> >> >>>>> >> >> >>>>> On Thu, Oct 18, 2012 at 4:31 AM, Joe Borġ <m...@jdborg.com> >> >> >>>>> wrote: >> >> >>>>>> >> >> >>>>>> Hi Leo, >> >> >>>>>> >> >> >>>>>> You don't seem to have used the Tetrahedralise filter? How have >> >> >>>>>> you >> >> >>>>>> got this to work without that? >> >> >>>>>> >> >> >>>>>> Mine works fine after setting the fluid as input and source as >> >> >>>>>> the >> >> >>>>>> inlet, but I must first use the Tetrahedralise filter. >> >> >>>>>> >> >> >>>>>> >> >> >>>>>> Regards, >> >> >>>>>> Joseph David Borġ >> >> >>>>>> http://www.jdborg.com >> >> >>>>>> >> >> >>>>>> >> >> >>>>>> On 17 October 2012 18:14, Yuanxin Liu <leo....@kitware.com> >> >> >>>>>> wrote: >> >> >>>>>>> >> >> >>>>>>> Hi Joe, >> >> >>>>>>> >> >> >>>>>>> I am not seeing exactly what you are seeing. In the attached >> >> >>>>>>> image >> >> >>>>>>> produced with the current master, I created a stream tracer >> >> >>>>>>> with >> >> >>>>>>> outlet >> >> >>>>>>> block as the seeds and the fluid block as the input, and the >> >> >>>>>>> streamlines >> >> >>>>>>> seem right. >> >> >>>>>>> >> >> >>>>>>> But I think there is a bug in how the stream tracer handles >> >> >>>>>>> multiblock data, because if I change the stream tracer input to >> >> >>>>>>> the whole >> >> >>>>>>> pipe data set, instead of just the fluid block, some stream >> >> >>>>>>> lines >> >> >>>>>>> go >> >> >>>>>>> straight to the void like you described. >> >> >>>>>>> >> >> >>>>>>> Can you try setting up the pipeline as I did using ExtractBlock >> >> >>>>>>> and >> >> >>>>>>> compare with my image? >> >> >>>>>>> >> >> >>>>>>> Leo >> >> >>>>>>> >> >> >>>>>>> On Wed, Oct 17, 2012 at 10:51 AM, Magician <f_magic...@mac.com> >> >> >>>>>>> wrote: >> >> >>>>>>>> >> >> >>>>>>>> Hi Joe, >> >> >>>>>>>> >> >> >>>>>>>> >> >> >>>>>>>> "Tetrahedralize" filter is applicable. >> >> >>>>>>>> All cells are splitted into Tetrahedral ones. >> >> >>>>>>>> Try it. >> >> >>>>>>>> >> >> >>>>>>>> >> >> >>>>>>>> Magician >> >> >>>>>>>> >> >> >>>>>>>> >> >> >>>>>>>> On 2012/10/17, at 23:40, Joe Borġ wrote: >> >> >>>>>>>> >> >> >>>>>>>> > Thanks Magician, >> >> >>>>>>>> > >> >> >>>>>>>> > Thanks for testing. What are you using to convert to tet? >> >> >>>>>>>> > Is >> >> >>>>>>>> > it >> >> >>>>>>>> > a ParaView feature? >> >> >>>>>>>> > >> >> >>>>>>>> > Leo, can the priority of the bug be raised please? >> >> >>>>>>>> > >> >> >>>>>>>> > >> >> >>>>>>>> > Regards, >> >> >>>>>>>> > Joseph David Borġ >> >> >>>>>>>> > http://www.jdborg.com >> >> >>>>>>>> > >> >> >>>>>>>> > >> >> >>>>>>>> > On 17 October 2012 14:20, Magician <f_magic...@mac.com> >> >> >>>>>>>> > wrote: >> >> >>>>>>>> > Hi Joseph, >> >> >>>>>>>> > >> >> >>>>>>>> > >> >> >>>>>>>> > I tried your data and got a result as yours. >> >> >>>>>>>> > Your data only includes Hex, Wedge, Tet and Pyramid, >> >> >>>>>>>> > but streamlines are stopped earlier. >> >> >>>>>>>> > >> >> >>>>>>>> > Same as my polyhedral pipe sample, I applied Tetrahedralize >> >> >>>>>>>> > filter >> >> >>>>>>>> > to your pipe source, and I could get valid streamlines. >> >> >>>>>>>> > >> >> >>>>>>>> > >> >> >>>>>>>> > Magician >> >> >>>>>>>> > >> >> >>>>>>>> > >> >> >>>>>>>> > > Pipe.tar.gz attached to the bug report below, in the form >> >> >>>>>>>> > > of >> >> >>>>>>>> > > an >> >> >>>>>>>> > > Ensight >> >> >>>>>>>> > > Case. First extract the archive and to open in Paraview, >> >> >>>>>>>> > > use >> >> >>>>>>>> > > "All files >> >> >>>>>>>> > > (*)" when browsing and select the .encas, then select >> >> >>>>>>>> > > "EnSight >> >> >>>>>>>> > > Files". >> >> >>>>>>>> > > >> >> >>>>>>>> > > >> >> >>>>>>>> > > Regards, >> >> >>>>>>>> > > Joseph David Borġ >> >> >>>>>>>> > > http://www.jdborg.com >> >> >>>>>>>> > > >> >> >>>>>>>> > > >> >> >>>>>>>> > > On 12 October 2012 03:28, Yuanxin Liu <leo.liu at >> >> >>>>>>>> > > kitware.com> >> >> >>>>>>>> > > wrote: >> >> >>>>>>>> > > >> >> >>>>>>>> > > > Hi, >> >> >>>>>>>> > > > Is it possible for you to upload the data? By the >> >> >>>>>>>> > > > way, >> >> >>>>>>>> > > > if >> >> >>>>>>>> > > > the cell >> >> >>>>>>>> > > > type is polyhedron, then this is quite likely the same >> >> >>>>>>>> > > > bug >> >> >>>>>>>> > > > as >> >> >>>>>>>> > > > this: >> >> >>>>>>>> > > > http://paraview.org/Bug/view.php?id=13442 >> >> >>>>>>>> > > > >> >> >>>>>>>> > > > Leo >> >> >>>>>>>> > > > >> >> >>>>>>>> > > > On Thu, Oct 11, 2012 at 6:17 AM, Joe Borġ <mail at >> >> >>>>>>>> > > > jdborg.com> >> >> >>>>>>>> > > > wrote: >> >> >>>>>>>> > > > >> >> >>>>>>>> > > >> Hi guys, >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> I've got an odd issue with the stream trace and stream >> >> >>>>>>>> > > >> trace >> >> >>>>>>>> > > >> custom >> >> >>>>>>>> > > >> source filters in Paraview (3.14.1 64bit). No matter >> >> >>>>>>>> > > >> what >> >> >>>>>>>> > > >> settings I use, >> >> >>>>>>>> > > >> the traces die off very soon and some even carry on >> >> >>>>>>>> > > >> straight >> >> >>>>>>>> > > >> (even when >> >> >>>>>>>> > > >> there's no fluid). >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> See the two screenshots I've got from Paraview. >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> http://jdborg.com/images/paraview/pv_inlet.png >> >> >>>>>>>> > > >> http://jdborg.com/images/paraview/pv_outlet.png >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> Not sure if this is a setting that's easy to miss or if >> >> >>>>>>>> > > >> it's >> >> >>>>>>>> > > >> more >> >> >>>>>>>> > > >> terminal. >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> Thanks, >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> >> >> >>>>>>>> > > >> Regards, >> >> >>>>>>>> > > >> Joseph David Borġ >> >> >>>>>>>> > > >> http://www.jdborg.com >> >> >>>>>>>> > >> >> >>>>>>>> >> >> >>>>>>> >> >> >>>>>> >> >> >>>>> >> >> >>>> >> >> >>> >> >> >> >> >> > >> >> > >> >> > _______________________________________________ >> >> > Powered by www.kitware.com >> >> > >> >> > Visit other Kitware open-source projects at >> >> > http://www.kitware.com/opensource/opensource.html >> >> > >> >> > Please keep messages on-topic and check the ParaView Wiki at: >> >> > http://paraview.org/Wiki/ParaView >> >> > >> >> > Follow this link to subscribe/unsubscribe: >> >> > http://www.paraview.org/mailman/listinfo/paraview >> >> > >> > >> > > > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
