Hello.
If you are using I=20, J=2 and K=1, you should have 20x2x1=40 points in
your mesh (it is a surface), so you should have 40 lines after the ZONE
line. Paraview finds only 20 lines and assumes zero for the 20 missing
values. So you have to repeat your 20 data lines at the end of your file.
Also, you should not have all X,Y,Z variables to zero because Paraview
cannot display the mesh. For instance, you may define a surface grid
assuming X=Distance for all your data. Then you should have Y=0 for the
first 20 data lines, and Y=non zero constant for the next 20 data lines
while keeping same X, Distance and Temperature values as in the first 20
lines. The variable Z may be kept to zero for all lines. Thus, your mesh
will look like a rectangle.
Le 18/07/2013 16:18, M. a écrit :
Hello Richard,
Thanks for your answer. Indeed, if I modify the file to
TITLE = "Example: Simple XY Plot"
VARIABLES = "X", "Y", "Z", "Distance", "Temperature"
ZONE T="Only Zone", I=20, J=2, K=1, F=POINT
0.0 0.0 0.0 0.0 850.9
0.0 0.0 0.0 0.022 790.1
0.0 0.0 0.0 0.051 554.0
0.0 0.0 0.0 0.069 540.0
0.0 0.0 0.0 0.075 545.5
0.0 0.0 0.0 0.083 549.4
0.0 0.0 0.0 0.106 590.2
0.0 0.0 0.0 0.1234 535.1
0.0 0.0 0.0 0.15 601.0
0.0 0.0 0.0 0.201 664.5
0.0 0.0 0.0 0.25 635.9
0.0 0.0 0.0 0.35 599.9
0.0 0.0 0.0 0.4454 600.0
0.0 0.0 0.0 0.49 513.0
0.0 0.0 0.0 0.5656 442.0
0.0 0.0 0.0 0.6423 333.5
0.0 0.0 0.0 0.6604 300.4
0.0 0.0 0.0 0.7 245.7
0.0 0.0 0.0 0.89 221.4
0.0 0.0 0.0 1.3 200.0
Paraview can read the file. But this poses a new problem: if I use
J=1, K=1, Paraview cannot read it again, but if I use J=2, K=1 or vice
versa Paraview can read it, but it shows the 20 values plus 20 zeros
after it. Is there a way to go around this?
Cheers
2013/7/18 Richard GRENON <[email protected]
<mailto:[email protected]>>
Hi all,
I'm still struggling with Paraview to read files in Tecplot format. I'm
using some examples from this site:
http://people.sc.fsu.edu/~jburkardt/data/tec/tec.html
<http://people.sc.fsu.edu/%7Ejburkardt/data/tec/tec.html>
The 3D examples are read correctly in Paraview, but the examples
http://people.sc.fsu.edu/~jburkardt/data/tec/simpxy.dat
<http://people.sc.fsu.edu/%7Ejburkardt/data/tec/simpxy.dat>
and
http://people.sc.fsu.edu/~jburkardt/data/tec/simpxy2.dat
<http://people.sc.fsu.edu/%7Ejburkardt/data/tec/simpxy2.dat>
are read but can't be plotted. All the statistics are N/A (Type, Number of
Cells, Number of Points), no bounds are recognized, and the Spreadsheet
view is empty. Is this a bug?
Hello.
Paraview is a 3D software that is always expecting a mesh (surface
or volume) with the three X, Y, Z variables for points
coordinates. Your simpxy.dat file has only two data variables
(Distance and Temperature), that is why it cannot build points and
cells and shows N/A (Not available). Try to add coordinates of a
grid to your file, and you should be able to plot Temperature
against Distance.
--
Richard GRENON
ONERA
Departement d'Aerodynamique Appliquee - DAAP/ACI
8 rue des Vertugadins
92190 MEUDON - FRANCE
phone : +33 1 46 73 42 17
fax : +33 1 46 73 41 46
mailto:[email protected]
http://www.onera.fr
--
Richard GRENON
ONERA
Departement d'Aerodynamique Appliquee - DAAP/ACI
8 rue des Vertugadins
92190 MEUDON - FRANCE
phone : +33 1 46 73 42 17
fax : +33 1 46 73 41 46
mailto:[email protected]
http://www.onera.fr
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
