Hi Mark, In the base edition of my version the only filter that I see that works is the Contour filter. If you use the coproc.py script for co-processing script and replace FECxxAdaptor.cxx you should be able to get it to run properly. The results will be garbage but it will produce a pvtp file.
As for how to enable other filters in your build of Catalyst, that should be in section 4 of the user's guide or in http://www.paraview.org/Wiki/Generating_Catalyst_Source_Tree. The cmake.sh file is just a simplified build script and doesn't do anything as far as enabling extra filters by itself. Andy On Thu, Aug 15, 2013 at 10:08 AM, Vanmoer, Mark W <[email protected]>wrote: > Hi Andy and Utkarsh, **** > > I’m not sure I can share the original code, so I tried the GitHub example > Andy linked. I configured it to use the Catalyst build directory for > ParaView_DIR. I still get the import errors, which I see I can ignore, but > then also**** > > ** ** > > Traceback (most recent call last):**** > > File "<string>", line 2, in <module>**** > > File "coproc.py", line 74, in DoCoProcessing**** > > coprocessor.UpdateProducers(datadescription)**** > > File > "/home/mvanmoer/builds/Catalyst/1.0.alpha-build/lib/site-packages/paraview/coprocessing.py", > line 102, in UpdateProducers**** > > self.CreatePipeline(datadescription)**** > > File "coproc.py", line 30, in CreatePipeline**** > > self.Pipeline = _CreatePipeline(self, datadescription)**** > > File "coproc.py", line 16, in _CreatePipeline**** > > class Pipeline:**** > > File "coproc.py", line 19, in Pipeline**** > > Slice1 = Slice( guiName="Slice1", Crinkleslice=0, > SliceOffsetValues=[0.0], Triangulatetheslice=1, SliceType="Plane" )**** > > NameError: name 'Slice' is not defined**** > > ** ** > > Okay, is this because of what you’re talking about below, Utkarsh? That > the Catalyst build won’t necessarily have any particular filter in it, I’d > have to specify what I need in the cmake.sh ahead of time?**** > > ** ** > > Mark**** > > ** ** > > *From:* Andy Bauer [mailto:[email protected]] > *Sent:* Wednesday, August 14, 2013 8:48 PM > *To:* Utkarsh Ayachit > *Cc:* Vanmoer, Mark W; [email protected] > > *Subject:* Re: [Paraview] Building Catalyst**** > > ** ** > > Utkarsh,**** > > > Is it worth the trouble to get rid of these error messages in Catalyst? ** > ** > > Also, the most up-to-date version of the user's guide is at > http://paraview.org/Wiki/images/4/48/CatalystUsersGuide.pdf.**** > > Andy**** > > ** ** > > On Wed, Aug 14, 2013 at 9:33 PM, Utkarsh Ayachit < > [email protected]> wrote:**** > > These are more of warning than errors. Catalyst can be thought of as a > stripped down ParaView. Several modules/components are removed to keep > the package small. There will be several "editions" of catalyst based > on which components they contain. The idea is one decides which > filters/components they are interested in using in-situ. Then we can > create a custom edition containing only those filters and the > components needed to get those filters working. This is to keep the > library size small for production runs. For testing, ParaView itself > includes the library against which the simulation adaptors can link. > Thus one can create/test adaptors using a regular ParaView itself. > That will have all the modules ParaView includes and hence one can > experiment with the which filters to use and pick to come up with the > short list of filters that can then be used to create a custom > edition. Within the next week or so, we are will have a couple more > editions available that will include some of the commonly used > filters. > > Hope that clarifies things a bit. FYI, there's a user's guide > available too that may help clarify this: > http://public.kitware.com/pipermail/paraview/2013-July/028795.html > > Utkarsh**** > > > On Wed, Aug 14, 2013 at 6:18 PM, Vanmoer, Mark W <[email protected]> > wrote: > > Okay, I was able to compile and run a Fortran code using the > FortranAdaptorAPI and I'm getting some errors. (I had this code working > with coprocessing and ParaView 3.14.1, so in theory it should still work). > > > > Error: Could not import vtkCommonComputationalGeometryPython > > Error: Could not import vtkCommonMiscPython > > Error: Could not import vtkCommonSystemPython > > Error: Could not import vtkRenderingCorePython > > Error: Could not import vtkFiltersCore > > Error: Cannot import vtkPVServerManagerDefaultPython > > Error: Cannot import vtkPVServerManagerRenderingPython > > Error: Cannot import vtkPVServerManagerApplicationPython > > Error: Could not create TimeKeeper > > Error: Could not create AnimationScene > > > > How do I get Catalyst to import these? Is it just a matter of setting > $PYTHONPATH? > > > > Mark > > > > > >> -----Original Message----- > >> From: Utkarsh Ayachit [mailto:[email protected]] > >> Sent: Wednesday, August 14, 2013 4:05 PM > >> To: Vanmoer, Mark W > >> Cc: [email protected] > >> Subject: Re: [Paraview] Building Catalyst > >> > >> Great! Feel free to ping the list if you run into issues or need > assistance. > >> > >> Utkarsh > >> > >> On Wed, Aug 14, 2013 at 4:21 PM, Vanmoer, Mark W > >> <[email protected]> wrote: > >> > Utkarsh, > >> > It did build this time, thank you. > >> > Mark > >> > > >> >> -----Original Message----- > >> >> From: Vanmoer, Mark W > >> >> Sent: Wednesday, August 14, 2013 11:57 AM > >> >> To: 'Utkarsh Ayachit' > >> >> Cc: [email protected] > >> >> Subject: RE: [Paraview] Building Catalyst > >> >> > >> >> Utkarsh, > >> >> I was just running ccmake, I read the wiki as cmake.sh was for > >> >> building Catalyst from the ParaView source tree. I'll try the > >> >> cmake.sh with the new tarball and report back. > >> >> > >> >> Mark > >> >> > >> >> > -----Original Message----- > >> >> > From: Utkarsh Ayachit [mailto:[email protected]] > >> >> > Sent: Wednesday, August 14, 2013 11:52 AM > >> >> > To: Vanmoer, Mark W > >> >> > Cc: [email protected] > >> >> > Subject: Re: [Paraview] Building Catalyst > >> >> > > >> >> > Mark, > >> >> > > >> >> > No, you wouldn't need to use any external VTK. I've posted an > >> >> > updated tarball. Feel free to give that a try. Also, how are you > >> >> > starting the build? Using cmake.sh script included in the package? > >> >> > > >> >> > Utkarsh > >> >> > > >> >> > On Wed, Aug 14, 2013 at 11:38 AM, Vanmoer, Mark W > >> >> > <[email protected]> wrote: > >> >> > > Hi, I'm trying to build Catalyst using the tarball from the > >> >> > > Catalyst download page. I'm getting the following error during > >> >> > > the CMake configure > >> >> > > step: > >> >> > > > >> >> > > > >> >> > > > >> >> > > CMake Error at VTK/CMake/vtkModuleTop.cmake:29 (message): > >> >> > > > >> >> > > No such module "vtkChartsCore" needed by > >> >> > "vtkPVServerManagerApplication" > >> >> > > > >> >> > > Call Stack (most recent call first): > >> >> > > > >> >> > > VTK/CMake/vtkModuleTop.cmake:45 (vtk_module_check) > >> >> > > > >> >> > > VTK/CMake/vtkModuleTop.cmake:52 (vtk_module_check) > >> >> > > > >> >> > > VTK/CMakeLists.txt:348 (include) > >> >> > > > >> >> > > > >> >> > > > >> >> > > Is all of the necessary VTK with the Catalyst tarball, or do I > >> >> > > need to have a separate VTK build? > >> >> > > > >> >> > > > >> >> > > > >> >> > > Thanks, > >> >> > > > >> >> > > Mark > >> >> > > > >> >> > > > >> >> > > _______________________________________________ > >> >> > > Powered by www.kitware.com > >> >> > > > >> >> > > Visit other Kitware open-source projects at > >> >> > > http://www.kitware.com/opensource/opensource.html > >> >> > > > >> >> > > Please keep messages on-topic and check the ParaView Wiki at: > >> >> > > http://paraview.org/Wiki/ParaView > >> >> > > > >> >> > > Follow this link to subscribe/unsubscribe: > >> >> > > http://www.paraview.org/mailman/listinfo/paraview > >> >> > > > >> > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Follow this link to subscribe/unsubscribe: > http://www.paraview.org/mailman/listinfo/paraview**** > > ** ** >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
