Ondrej, Do you have a small example that I can use to reproduce the problem?
thankyou David E DeMarle Kitware, Inc. R&D Engineer 21 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-881-4909 On Mon, Aug 10, 2015 at 10:02 AM, Ondřej Čertík <[email protected]> wrote: > Hi, > > We would like to use the Multi-block inspector to turn solutions on > and off on a given subdomain (set of blocks). Just like it works if > you load an Exodus file. We use XDMF and we were told to use Sets to > designate subdomains. We did that and indeed they appear in the > Multi-block inspector, but unfortunately they do not work to turn > solutions on and off. For some reason, they only appear to add > geometry *over* the solutions, so you don't see any solutions at all. > Only if you turn them off, then you can see the solution on the whole > mesh. In particular, you can't use those to turn off a solution on > just part of it. > > Essentially it looks like if Sets created a new geometry without any > solutions associated with it (and allow to turn parts of this geometry > on and off, as expected), and then visualized it on top of the > original mesh+solutions. > > Any ideas how to resolve that? > > I tested ParaView 4.3.1. > > Thanks, > Ondrej Certik > Los Alamos National Laboratory > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
