Frank, Thanks for the info on where you got the code. Maybe there's a problem with the source packaging? I'll try out that download and see if I can reproduce the problem.
Thanks, Cory On Fri, Dec 18, 2015 at 9:15 AM, Albina, Frank < [email protected]> wrote: > Hi Cory! > > > > I have compiled the source code from the Paraview v5.0.0-RC2 source files > that I downloaded earlier this week from http://www.paraview.org/download/. > > No GIT repository there and none to be found in the top-level directory of > the source files. > > > > Paraview client & server are from the same build, since I am starting both > server and client from the same command line on the (Linux) workstation, > hence I am using the same environement. > > > > HTH, > > > Frank. > > > > *From:* Cory Quammen [mailto:[email protected]] > *Sent:* Freitag, 18. Dezember 2015 15:08 > *To:* Albina, Frank > *Cc:* [email protected] > *Subject:* Re: [Paraview] Paraview v5.0.0-rc2 with OpenGL2 backend > failing to start in parallel > > > > Hi Frank, > > > > Since you said you recompiled ParaView, I suspect that maybe you forgot to > update the submodules ParaView uses. In the ParaView source tree, run > > > > git status > > > > If VTK is listed, it may say there are new commits available for VTK. To > update VTK, run > > > > git submodule update > > > > This has been an issue a few folks have encountered in the past. > > > > Also, double-check that your ParaView client and server are truly from the > same build. > > > > HTH, > > Cory > > > > On Fri, Dec 18, 2015 at 8:30 AM, Albina, Frank < > [email protected]> wrote: > > Dear all! > > > > I recompiled Paraview-v5.0.0-rc2 from scratch using OpenMPI v1.6.5 and GCC > v4.7.2 on my workstation. > > The QT & Python versions are the default system versions and are resp. > 4.8.4 & 2.7.3. > > > > After successful compilation and installation, I start 8 parallel pvserver > instances with: > > mpirun –np 8 pvserver –sp=7436 > > > > Then, I start paraview and connect to the server running on the same > machine. After connection is established, paraview fails with a > segmentation fault. > > > > Waiting for client... > > Connection URL: cs://ws334:7436 > > Accepting connection(s): ws334:7436 > > Client connected. > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Parallel/Core/vtkSocketCommunicator.cxx, > line 809 > > vtkSocketCommunicator (0x2b7a600): Could not receive tag. 1 > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > […] > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > -------------------------------------------------------------------------- > > mpirun noticed that process rank 0 with PID 13964 on node ws334 exited on > signal 11 (Segmentation fault). > > -------------------------------------------------------------------------- > > > > I have included hereafter how Paraview was compiled: > > cmake $sourceDir \ > > -DBUILD_SHARED_LIBS:BOOL=ON\ > > -DBUILD_TESTING:BOOL=OFF\ > > -DBUILD_DOCUMENTATION:BOOL=ON\ > > -DCMAKE_BUILD_TYPE:STRING=Release\ > > -DPARAVIEW_ENABLE_CATALYST:BOOL=ON\ > > -DPARAVIEW_ENABLE_VTK_MODULES_AS_NEEDED:BOOL=TRUE\ > > -DPARAVIEW_USE_MPI:BOOL=ON\ > > -DPARAVIEW_USE_UNIFIED_BINDINGS:BOOL=ON\ > > -DPARAVIEW_ENABLE_WEB:BOOL=ON\ > > -DVTK_OPENGL_HAS_OSMESA:BOOL=OFF\ > > -DPARAVIEW_BUILD_PLUGIN_SurfaceLIC:BOOL=TRUE\ > > -DPARAVIEW_ENABLE_VTK_MODULES_AS_NEEDED:BOOL=TRUE\ > > -DVTK_USE_OFFSCREEN:BOOL=OFF\ > > -DVTK_USE_X:BOOL=ON\ > > -DVTK_USE_QT=ON\ > > -DVTK_USE_DISPLAY=ON\ > > -DVTK_USE_GUI_SUPPORT:BOOL=ON\ > > -DPARAVIEW_BUILD_QT_GUI:BOOL=ON\ > > -DCMAKE_INSTALL_PREFIX:PATH=$installDir\ > > -DPARAVIEW_ENABLE_PYTHON:BOOL=ON\ > > -DPYTHON_ENABLE_MODULE_MPIPython:BOOL=ON\ > > -DQT_QMAKE_EXECUTABLE:FILEPATH=/usr/bin/qmake\ > > -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python2\ > > -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python2.7\ > > -DPYTHON_LIBRARY:FILEPATH=/usr/lib64/libpython2.7.so\ > > -DPYTHON_UTIL_LIBRARY:FILEPATH=/usr/lib64/libutil.so\ > > -DVTK_RENDERING_BACKEND:STRING=OpenGL2\ > > -DModule_vtkRenderingLICOpenGL2:BOOL=ON > > > > I must have missed something since I guess that Paraview using parallel > servers should run, even when there is only one GPU available. Any hints > would be greatly appreciated. > > > > Best regards, > > > > *Frank Albina * > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > > > > > -- > > Cory Quammen > R&D Engineer > Kitware, Inc. > -- Cory Quammen R&D Engineer Kitware, Inc.
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
