Hi Frank, The official binaries of 5.0.0-RC1 on Mac work fine for me the way you tried. Everything works fine on the master branch as well
However, when I build the same configuration as you for the 5.0.0-RC2 tar file on the downloads page of www.paraview.org on a Mac, I get a similar error and a crash in the client. Partial stack trace from the client: 0 org.python.python 0x0000000109b6a1b6 PyObject_Call + 23 1 org.python.python 0x0000000109be8e83 PyEval_CallObjectWithKeywords + 165 2 libvtkClientServer-pv5.0.1.dylib 0x000000010715c253 CommandFunctionCallback(vtkClientServerInterpreter*, vtkObjectBase*, char const*, vtkClientServerStream const&, vtkClientServerStream&, void*) + 3971 3 libvtkClientServer-pv5.0.1.dylib 0x000000010714600b vtkClientServerInterpreter::CallCommandFunction(char const*, vtkObjectBase*, char const*, vtkClientServerStream const&, vtkClientServerStream&) + 155 4 libvtkClientServer-pv5.0.1.dylib 0x000000010714493b vtkClientServerInterpreter::ProcessCommandInvoke(vtkClientServerStream const&, int) + 331 5 libvtkClientServer-pv5.0.1.dylib 0x0000000107143c45 vtkClientServerInterpreter::ProcessOneMessage(vtkClientServerStream const&, int) + 741 6 libvtkClientServer-pv5.0.1.dylib 0x000000010714392d vtkClientServerInterpreter::ProcessStream(vtkClientServerStream const&) + 45 7 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3c744 vtkSIProperty::ProcessMessage(vtkClientServerStream&) + 52 8 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3bf8e vtkSIVectorPropertyTemplate<int, int>::Push(int*, int) + 654 9 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3ba1f vtkSIVectorPropertyTemplate<int, int>::ReadXMLAttributes(vtkSIProxy*, vtkPVXMLElement*) + 271 10 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3eeb6 vtkSIProxy::ReadXMLProperty(vtkPVXMLElement*) + 742 11 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3e9ed vtkSIProxy::ReadXMLAttributes(vtkPVXMLElement*) + 797 12 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3e346 vtkSIProxy::CreateVTKObjects(paraview_protobuf::Message*) + 2086 13 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e3ce01 vtkSIProxy::Push(paraview_protobuf::Message*) + 33 14 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e248ec vtkPVSessionCore::PushStateInternal(paraview_protobuf::Message*) + 2220 15 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e24ba6 vtkPVSessionCore::PushState(paraview_protobuf::Message*) + 262 16 libvtkPVServerImplementationCore-pv5.0.1.dylib 0x0000000106e220f6 vtkPVSessionBase::PushState(paraview_protobuf::Message*) + 38 17 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106d2630a vtkSMSessionClient::PushState(paraview_protobuf::Message*) + 426 18 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106d0040c vtkSMProxy::CreateVTKObjects() + 1276 19 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106d42aab vtkSMSettingsProxy::CreateVTKObjects() + 27 20 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106cffa61 vtkSMProxy::UpdateVTKObjects() + 33 21 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106ceccc5 vtkSMParaViewPipelineController::PostInitializeProxy(vtkSMProxy*) + 517 22 libvtkPVServerManagerRendering-pv5.0.1.dylib 0x0000000109e288b3 vtkSMParaViewPipelineControllerWithRendering::PostInitializeProxy(vtkSMProxy*) + 51 23 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106cec898 vtkSMParaViewPipelineController::UpdateSettingsProxies(vtkSMSession*) + 296 24 libvtkPVServerManagerCore-pv5.0.1.dylib 0x0000000106ce9d74 vtkSMParaViewPipelineController::InitializeSession(vtkSMSession*) + 452 25 libvtkpqCore-pv5.0.1.dylib 0x0000000106688e5c pqServerManagerModel::onConnectionCreated(long long) + 636 On the server, I get ERROR: In /Users/cory.quammen/src/ParaView-v5.0.0-RC2-source/VTK/Parallel/Core/vtkSocketCommunicator.cxx, line 809 vtkSocketCommunicator (0x7fbc2a4e8930): Could not receive tag. 1 I'll check around to see what might be up with the source code packaging. Thanks for the report, Cory On Fri, Dec 18, 2015 at 10:00 AM, Albina, Frank < [email protected]> wrote: > Hi Cory! > > Thank you very much for that. > > As said earlier in another post, I am very keen to see PV v5.0.0 release > so I am happy to help and report issues before the new version gets > unleashed. > > Cheers, > > Frank. > > *From:* Cory Quammen [mailto:[email protected]] > *Sent:* Freitag, 18. Dezember 2015 15:39 > > *To:* Albina, Frank > *Cc:* [email protected] > *Subject:* Re: [Paraview] Paraview v5.0.0-rc2 with OpenGL2 backend > failing to start in parallel > > > > Frank, > > > > Thanks for the info on where you got the code. Maybe there's a problem > with the source packaging? I'll try out that download and see if I can > reproduce the problem. > > > > Thanks, > > Cory > > > > On Fri, Dec 18, 2015 at 9:15 AM, Albina, Frank < > [email protected]> wrote: > > Hi Cory! > > > > I have compiled the source code from the Paraview v5.0.0-RC2 source files > that I downloaded earlier this week from http://www.paraview.org/download/. > > No GIT repository there and none to be found in the top-level directory of > the source files. > > > > Paraview client & server are from the same build, since I am starting both > server and client from the same command line on the (Linux) workstation, > hence I am using the same environement. > > > > HTH, > > > Frank. > > > > *From:* Cory Quammen [mailto:[email protected]] > *Sent:* Freitag, 18. Dezember 2015 15:08 > *To:* Albina, Frank > *Cc:* [email protected] > *Subject:* Re: [Paraview] Paraview v5.0.0-rc2 with OpenGL2 backend > failing to start in parallel > > > > Hi Frank, > > > > Since you said you recompiled ParaView, I suspect that maybe you forgot to > update the submodules ParaView uses. In the ParaView source tree, run > > > > git status > > > > If VTK is listed, it may say there are new commits available for VTK. To > update VTK, run > > > > git submodule update > > > > This has been an issue a few folks have encountered in the past. > > > > Also, double-check that your ParaView client and server are truly from the > same build. > > > > HTH, > > Cory > > > > On Fri, Dec 18, 2015 at 8:30 AM, Albina, Frank < > [email protected]> wrote: > > Dear all! > > > > I recompiled Paraview-v5.0.0-rc2 from scratch using OpenMPI v1.6.5 and GCC > v4.7.2 on my workstation. > > The QT & Python versions are the default system versions and are resp. > 4.8.4 & 2.7.3. > > > > After successful compilation and installation, I start 8 parallel pvserver > instances with: > > mpirun –np 8 pvserver –sp=7436 > > > > Then, I start paraview and connect to the server running on the same > machine. After connection is established, paraview fails with a > segmentation fault. > > > > Waiting for client... > > Connection URL: cs://ws334:7436 > > Accepting connection(s): ws334:7436 > > Client connected. > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Parallel/Core/vtkSocketCommunicator.cxx, > line 809 > > vtkSocketCommunicator (0x2b7a600): Could not receive tag. 1 > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > […] > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > ERROR: In > /cfdcode/opensuse12/opt/ParaView/SRC/paraview-5.0.0-rc2/VTK/Common/System/vtkSocket.cxx, > line 572 > > vtkClientSocket (0x293e940): Socket error in call to send. Broken pipe. > > > > -------------------------------------------------------------------------- > > mpirun noticed that process rank 0 with PID 13964 on node ws334 exited on > signal 11 (Segmentation fault). > > -------------------------------------------------------------------------- > > > > I have included hereafter how Paraview was compiled: > > cmake $sourceDir \ > > -DBUILD_SHARED_LIBS:BOOL=ON\ > > -DBUILD_TESTING:BOOL=OFF\ > > -DBUILD_DOCUMENTATION:BOOL=ON\ > > -DCMAKE_BUILD_TYPE:STRING=Release\ > > -DPARAVIEW_ENABLE_CATALYST:BOOL=ON\ > > -DPARAVIEW_ENABLE_VTK_MODULES_AS_NEEDED:BOOL=TRUE\ > > -DPARAVIEW_USE_MPI:BOOL=ON\ > > -DPARAVIEW_USE_UNIFIED_BINDINGS:BOOL=ON\ > > -DPARAVIEW_ENABLE_WEB:BOOL=ON\ > > -DVTK_OPENGL_HAS_OSMESA:BOOL=OFF\ > > -DPARAVIEW_BUILD_PLUGIN_SurfaceLIC:BOOL=TRUE\ > > -DPARAVIEW_ENABLE_VTK_MODULES_AS_NEEDED:BOOL=TRUE\ > > -DVTK_USE_OFFSCREEN:BOOL=OFF\ > > -DVTK_USE_X:BOOL=ON\ > > -DVTK_USE_QT=ON\ > > -DVTK_USE_DISPLAY=ON\ > > -DVTK_USE_GUI_SUPPORT:BOOL=ON\ > > -DPARAVIEW_BUILD_QT_GUI:BOOL=ON\ > > -DCMAKE_INSTALL_PREFIX:PATH=$installDir\ > > -DPARAVIEW_ENABLE_PYTHON:BOOL=ON\ > > -DPYTHON_ENABLE_MODULE_MPIPython:BOOL=ON\ > > -DQT_QMAKE_EXECUTABLE:FILEPATH=/usr/bin/qmake\ > > -DPYTHON_EXECUTABLE:FILEPATH=/usr/bin/python2\ > > -DPYTHON_INCLUDE_DIR:FILEPATH=/usr/include/python2.7\ > > -DPYTHON_LIBRARY:FILEPATH=/usr/lib64/libpython2.7.so\ > > -DPYTHON_UTIL_LIBRARY:FILEPATH=/usr/lib64/libutil.so\ > > -DVTK_RENDERING_BACKEND:STRING=OpenGL2\ > > -DModule_vtkRenderingLICOpenGL2:BOOL=ON > > > > I must have missed something since I guess that Paraview using parallel > servers should run, even when there is only one GPU available. Any hints > would be greatly appreciated. > > > > Best regards, > > > > *Frank Albina * > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > > > > > -- > > Cory Quammen > R&D Engineer > Kitware, Inc. > > > > > > -- > > Cory Quammen > R&D Engineer > Kitware, Inc. > -- Cory Quammen R&D Engineer Kitware, Inc.
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
