In fact :( I already tried tiled display but the backgroup is not
correctly split. And yes, I am asking for stereoscopic mode and Cristal
Eyes active stereo.
Do you know if this feature is going to be supported in a next release
of ParaView ?
I did not understand the command "/bin/uname (and xterm -r "uname -a"
-hold)". Do you mean I have to run
> mpirun -np 8 -machinefile
/opt/software/ParaView/PVscripts/server_machinefile.txt
/opt/software/ParaView/ParaView-5.0.0-bin/bin/pvserver -rc
--client-host=mire-pc /opt/software/ParaView/PVresources/wall_config.pvx
/bin/uname ???
Regards,
Cindy
Le 01/04/2016 20:03, David E DeMarle a écrit :
And of course I just now realized that you are asking for 3D ie
stereoscopic mode and remembered that tiled display does not (yet)
support Crystal Eyes active stereo.
apologies
David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909
On Fri, Apr 1, 2016 at 1:45 PM, David E DeMarle
<[email protected] <mailto:[email protected]>> wrote:
Aiming for this right?
-------------------
|1-1|1-2|2-1|2-2|
-------------------
|3-1|3-2|4-1|4-2|
-------------------
-tdx=3 -tdy=2
machinefile.txt that you pass to mpi should be (syntax depends on
your mpi)
node1
node1
node2
node2
node3
node3
node4
node4
The point being that you want them to start up in the same order
that you have in your pvx file. Use > mpirun ... /bin/uname (and
xterm -r "uname -a" -hold) to work out the details.
Lastly you don't need the LowerLeft, LowerRight and UpperRight for
tile mode, but it will be useful for stereoscopic display so keep
it handy.
David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909 <tel:518-881-4909>
On Fri, Apr 1, 2016 at 1:06 PM, Cindy Castro <[email protected]
<mailto:[email protected]>> wrote:
H Joachim and David,
Thank you for answering. I tried to apply an Image AND
Gradient background and it was not correctly split over the
different screens. I think it is cave mode actually. I have
tested tile mode but the display is not well ordered. I tried
to correct it with mpirun (-tdx=2, -tdy=4) but I may have
missed something in the command line.
Here is my pvx file :
<?xml version="1.0" ?>
<pvx>
<Process Type="client" />
<Process Type="server">
<EyeSeparation Value="0.060"/>
<Machine Name="node1-1"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+0+0"
LowerLeft=" -2.593 0.992 -2.593"
LowerRight="-1.497 0.993 -3.689"
UpperRight="-1.497 1.865 -3.689" />
<Machine Name="node1-2"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+1920+0"
LowerLeft=" -1.497 0.993 -3.689"
LowerRight=" 0.000 0.997 -4.090"
UpperRight=" 0.000 1.869 -4.090" />
<Machine Name="node2-1"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+0+0"
LowerLeft=" 0.000 0.997 -4.090"
LowerRight=" 1.497 1.007 -3.689"
UpperRight=" 1.497 1.879 -3.689"/>
<Machine Name="node2-2"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+1920+0"
LowerLeft=" 1.497 1.007 -3.689"
LowerRight=" 2.593 0.997 -2.593"
UpperRight=" 2.593 1.869 -2.593"/>
<Machine Name="node3-1"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+0+0"
LowerLeft=" -2.593 0.120 -2.593"
LowerRight="-1.497 0.121 -3.689"
UpperRight="-1.497 0.993 -3.689" />
<Machine Name="node3-2"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+1920+0"
LowerLeft=" -1.497 0.121 -3.689"
LowerRight=" 0.000 0.125 -4.090"
UpperRight=" 0.000 0.997 -4.090" />
<Machine Name="node4-1"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+0+0"
LowerLeft=" 0.000 0.125 -4.090"
LowerRight=" 1.497 0.135 -3.689"
UpperRight=" 1.497 1.007 -3.689"/>
<Machine Name="node4-2"
Environment="DISPLAY=:0.0"
FullScreen="0"
ShowBorders="0"
Geometry="1920x1080+1920+0"
LowerLeft=" 1.497 0.135 -3.689"
LowerRight=" 2.593 0.125 -2.593"
UpperRight=" 2.593 0.997 -2.593"/>
</Process>
</pvx>
Regards,
Cindy
Le 01/04/2016 17:55, David E DeMarle a écrit :
Cindy,
I can't remember which mode, tile or cave, doesn't support
tile and gradient background. But from what you and Joachim
say it must be cave.
You should aim for tile mode then. You can enforce and thus
correct the ordering problem you see with tile mode with
your mpirun command and the your cave.pvx file. Can you share
your /opt/software/ParaView/PVresources/wall_config.pvx? So I
can suggest a fix?
thanks
David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909 <tel:518-881-4909>
On Fri, Apr 1, 2016 at 11:10 AM, Joachim Pouderoux
<[email protected]
<mailto:[email protected]>> wrote:
Hi Cindy,
Not totally sure to understand - are you trying to apply
an Image or Gradient background and would like it to be
correctly split over the different screen? If so, I am
afraid this feature is not supported.
Best,
Joachim
*Joachim Pouderoux*
/PhD, Technical Expert/
*Kitware SAS <http://www.kitware.fr>*
2016-04-01 10:06 GMT+02:00 Cindy Castro
<[email protected] <mailto:[email protected]>>:
Hello,
I am using ParaView in client/server mode with
stereo. I have a cluster with 4 nodes, 1 GPU each
(NVIDIA K5000) and 8 screens for display.
My problem is I can not find how to span a background
over my 8 screens. The background is displayed on
each screen. 3D models are well displayed in 3D (no
problem with that).
The server is run with the command:
mpirun -np 8 -machinefile
/opt/software/ParaView/PVscripts/server_machinefile.txt
/opt/software/ParaView/ParaView-5.0.0-bin/bin/pvserver -rc
--client-host=mire-pc
/opt/software/ParaView/PVresources/wall_config.pvx
I tried tiles mode but the display is not in the
right order...
Can you help me ? Is it possible to span a background
over several screens in 3D mode ? I is really useful
when rendering.
Regards,
--
Cindy CASTRO
Responsable plateforme DIGISCOPE-MIRE
Plateforme d'Intégration et de Tests (PIT)
--
Observatoire de Versailles Saint-Quentin-en-Yvelines
(OVSQ)
Quartier des Garennes
11 Boulevard d'Alembert
78280 Guyancourt
--
Bâtiment principal - RDC - Bureau 215
Tél : +33 (0)1 80 28 51 03
<tel:%2B33%20%280%291%2080%2028%2051%2003>
Salle MIRE : +33 (0)1 80 28 54 93
<tel:%2B33%20%280%291%2080%2028%2054%2093>
---
L'absence de virus dans ce courrier électronique a
été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
_______________________________________________
Powered by www.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView
Wiki at: http://paraview.org/Wiki/ParaView
Search the list archives at:
http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki
at: http://paraview.org/Wiki/ParaView
Search the list archives at:
http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
--
Cindy CASTRO
Responsable plateforme DIGISCOPE-MIRE
Plateforme d'Intégration et de Tests (PIT)
--
Observatoire de Versailles Saint-Quentin-en-Yvelines (OVSQ)
Quartier des Garennes
11 Boulevard d'Alembert
78280 Guyancourt
--
Bâtiment principal - RDC - Bureau 215
Tél :+33 (0)1 80 28 51 03 <tel:%2B33%20%280%291%2080%2028%2051%2003>
Salle MIRE :+33 (0)1 80 28 54 93
<tel:%2B33%20%280%291%2080%2028%2054%2093>
Cet e-mail a été envoyé depuis un ordinateur protégé par Avast.
www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
--
Cindy CASTRO
Responsable plateforme DIGISCOPE-MIRE
Plateforme d'Intégration et de Tests (PIT)
--
Observatoire de Versailles Saint-Quentin-en-Yvelines (OVSQ)
Quartier des Garennes
11 Boulevard d'Alembert
78280 Guyancourt
--
Bâtiment principal - RDC - Bureau 215
Tél : +33 (0)1 80 28 51 03
Salle MIRE : +33 (0)1 80 28 54 93
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel
antivirus Avast.
https://www.avast.com/antivirus
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
