Thank you for sharing your cmake command Adam! I will try out your command.
Best regards, Chris Neal From: Adam Lyon <[email protected]> Date: Monday, July 25, 2016 at 1:50 PM To: Andy Bauer <[email protected]> Cc: Christopher Neal <[email protected]>, jeff wright <[email protected]>, "[email protected]" <[email protected]> Subject: Re: [Paraview] Procedure for compiling Catalyst Hi - I build the ParaView package with Catalyst turned on (but the ParaView GUI turned off). My cmake command is (sorry for the poor formatting, some of these options may not be useful for you)... cmake -DCMAKE_BUILD_TYPE:STRING=Release -DCMAKE_SKIP_INSTALL_RPATH:BOOL=YES -DBUILD_TESTING:BOOL=OFF -DPARAVIEW_BUILD_QT_GUI:BOOL=OFF -DVTK_RENDERING_BACKEND=OpenGL2 -DPARAVIEW_USE_MPI:BOOL=ON -DPARAVIEW_ENABLE_PYTHON:BOOL=ON -DPARAVIEW_INSTALL_DEVELOPMENT_FILES:BOOL=ON -DPARAVIEW_BUILD_CATALYST_ADAPTERS:BOOL=ON -DPARAVIEW_BUILD_PLUGIN_AnalyzeNIfTIIO:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_ArrowGlyph:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_CDIReader:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_EyeDomeLighting:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_GMVReader:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_GeodesicMeasurement:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_H5PartReader:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_InSituExodus:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_MantaView:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_Moments:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_NonOrthogonalSource:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_PacMan:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_PointSprite:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_RGBZView:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_SLACTools:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_SciberQuestToolKit:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_SierraPlotTools:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_StreamingParticles:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_SurfaceLIC:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_ThickenLayeredCells:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_UncertaintyRendering:BOOL=FALSE -DPARAVIEW_BUILD_PLUGIN_AcceleratedAlgorithms:BOOL=OFF -DVTK_USE_CXX11_FEATURES:BOOL=ON -DCMAKE_INSTALL_PREFIX=/somewhere /path/to/paraview/git/source This will build ParaView, VTK, and Catalyst and install header files so you can build your code with it. -- Adam ------ Adam L. Lyon Scientist; Associate Division Head for Systems for Scientific Applications Scientific Computing Division & Muon g-2 Experiment Fermi National Accelerator Laboratory 630 840 5522 office www.fnal.gov [email protected] Connect with us! News | Facebook | Twitter On Mon, Jul 25, 2016 at 12:16 PM, Andy Bauer <[email protected]> wrote: Hi Chris, Catalyst is not a separate entity from ParaView. It is a subset of ParaView that is used for in situ processing. The concept of the editions is that the subset of interest differs based on the desired in situ processing and linking your simulation code to all of ParaView Catalyst can take up a significant amount of memory. Hopefully the blog post at https://blog.kitware.com/paraview-catalyst-editions-what-are-they/ may clear up your confusion. Best, Andy On Mon, Jul 25, 2016 at 1:07 PM, Christopher Neal <[email protected]> wrote: Thank you Andy, My understanding is that the Catalyst editions can be compiled separately from Paraview i.e. I do not need to have a version of Paraview compiled in order to compile a Catalyst edition. Is this correct? Thank you, Chris From: Andy Bauer <[email protected]> Date: Friday, July 22, 2016 at 8:23 PM To: Christopher Neal <[email protected]> Cc: "[email protected]" <[email protected]> Subject: Re: [Paraview] Procedure for compiling Catalyst Hi Chris, You can get the Catalyst editions source code at http://www.paraview.org/download/ by just selecting Catalyst editions for Type of Download. If you're just getting started though I would recommend doing a build of ParaView without the GUI. Yes this will require learning a bit of CMake (see instructions for building ParaView at http://www.paraview.org/Wiki/ParaView:Build_And_Install) but it will likely be smoother for you for understanding Catalyst's capabilities. Also, it's much easier to link a simulation code with Catalyst through CMake than specifying all of the include directories and libraries. When you're looking for a lean build of Catalyst on an HPC machine then I'd suggest going the edition route (the editions help avoid cross-compilation issues on HPC machines too). Best, Andy On Fri, Jul 22, 2016 at 6:16 PM, Christopher Neal <[email protected]> wrote: Hi All, I’m interesting in trying to compile Paraview Catalyst. I understand that there are ‘Editions’ of the Catalyst library that vary in the amount of functions that are included from the Paraview library. That’s about the extent of my knowledge about the actual source for the Catalyst library. The documentation that I have found for compiling Catalyst is a bit dated(~3 years old), and I haven’t been able to locate an up-to-date set of documents that detail the compilation procedure for building Catalyst. If I want Catalyst, must I first have a version of Paraview built from scratch on my system? The best documentation that I have found for building Paraview is (http://www.paraview.org/Wiki/ParaView:Build_And_Install#Download_ParaView_Source_Code), and I’m having trouble getting Paraview to build from the instructions(I’ve never used cmake before). Has anyone who has successfully built the Catalyst library or knows about the process lend me any tips about how I should approach building Catalyst? Thank you, Chris Neal _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
