Try setting your whole extent to 0 19 0 19 0 34
HTH, Cory On Mon, Oct 31, 2016 at 1:43 PM, Vaibhav Agrawal <[email protected]> wrote: > Hi Paraview, > > I have a range of scalar data distributed over space domain. The space > domain of 20 cm X 20 cm X 35 cm is divided into 20 X 20 X 20 cells in x-, > y-, and z direction. I am trying to read the data in Paraview using “Table > to structured grid filter”. > > I have followed the following procedure: > > 1) Open the csv file in paraview, with default setting (Detect Numeric > Columns - ON, Use String Delimiter - ON, Have Headers - ON, Field Delimiter > Characters should be a comma - ',') > > 2) Applied the “Table To Structured Grid” filter from “Filters/ > Alphabetical/ Table To Structured Grid”. Following setting were followed > > a. Whole extent was defined as follows : > > 1 20 > > 1 20 > > 1 35 > > b. Column with header ‘x’, ‘y’, and ‘z’ (column D-, E- and F- in csv > sheet) were defined as X, Y and Z coordinates in setting. > > 3) Applied the filter. > > > > However, I am getting the following error > > > > ERROR: In > C:\DBD\pvs-x64\paraview\src\paraview\VTK\Common\ExecutionModel\vtkExecutive.cxx, > line 784 > > vtkPVCompositeDataPipeline (000000000BED29A0): Algorithm > vtkTableToStructuredGrid(000000000B6FE460) returned failure for request: > vtkInformation (000000000A86EE00) > > Debug: Off > > Modified Time: 2918770 > > Reference Count: 1 > > Registered Events: (none) > > Request: REQUEST_DATA > > ALGORITHM_AFTER_FORWARD: 1 > > FORWARD_DIRECTION: 0 > > FROM_OUTPUT_PORT: 0 > > > > I guess this error is because I am unable to define properly the “whole > Extent” property. > > Can you please elaborate, what should be set as the “whole extent” with the > example of my csv file. > > > > I am attaching the csv file for your reference. > > > > > > Thanks and Regards > > Vaibhav Agrawal > PhD | Department of Chemical Engineering > > Faculty of Science and Engineering > > Curtin University > Mobile | +61451818978 > Email | [email protected] > Web | http://curtin.edu.au > > > Curtin University is a trademark of Curtin University of Technology. > CRICOS Provider Code 00301J (WA), 02637B (NSW) > > > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > -- Cory Quammen Staff R&D Engineer Kitware, Inc. _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
