Hi Patrick,
Your output shows you enabled some gpu specific drivers, and GLX. I
think that is going to screw things up for you. Best to disable all of
them but the ones you specifically need and to explicitly disable glx.
Here is how I configured OSMesa for a Cray
../mesa-17.0.2/configure --enable-texture-float --disable-glx
--disable-dri --disable-egl --disable-gles1 --disable-gles2
--disable-gbm --disable-driglx-direct --disable-xvmc
--enable-gallium-osmesa --with-gallium-drivers=swrast,swr
--prefix=/usr/common/software/ParaView/mesa/17.0.2/
And here is how ParaView is configured on the same system. When building
ParaView with OSMesa the ParaView GUI should be disabled to prevent
window system dependencies(X11, Qt etc). Note that there are a number of
options in play to configure for OSMesa. I've highlighted them in blue
below. This info is also on the Wiki.
#!/bin/bash
LIB_EXT=so
PY_LIB_EXT=so
GLU_LIB_EXT=so
MESA_LIB_EXT=so
COMP_FLAGS="-fPIC -Ofast -march=native -mtune=native"
CCOMP=`which gcc`
CXXCOMP=`which g++`
FTNCOMP=`which gfortran`
export XTPE_LINK_TYPE=dynamic
PYTHON=/usr/common/software/ParaView/python/2.7.12
GLU=/usr/common/software/ParaView/glu/9.0.0/
BOOST=/usr/common/software/ParaView/boost/1.63.0/
MESA=/usr/common/software/ParaView/mesa/17.0.2/
RCA=/opt/cray/rca/2.1.6_g2c60fbf-2.265/lib64
ALPS=/opt/cray/alps/6.3.4-2.21/lib64
XPMEM=/opt/cray/xpmem/2.1.1_gf9c9084-2.38/lib64
DMAPP=/opt/cray/dmapp/7.1.1-39.37/lib64
PMI=/opt/cray/pe/pmi/5.0.10-1.0000.11050.0.0.ari/lib64
UGNI=/opt/cray/ugni/6.0.15-2.2/lib64
UDREG=/opt/cray/udreg/2.3.2-7.54/lib64
MPT=/opt/cray/pe/mpt/7.4.4/gni/mpich-gnu/5.1/lib
cmake \
-DCMAKE_C_COMPILER=$CCOMP \
-DCMAKE_CXX_COMPILER=$CXXCOMP \
-DCMAKE_Fortran_COMPILER=$FTNCOMP \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_CXX_FLAGS=$COMP_FLAGS \
-DCMAKE_C_FLAGS=$COMP_FLAGS \
-DBUILD_SHARED_LIBS=OFF \
-DPARAVIEW_ENABLE_PYTHON=ON \
-DPYTHON_EXECUTABLE=$PYTHON/bin/python \
-DPYTHON_INCLUDE_DIR=$PYTHON/include/python2.7 \
-DPYTHON_LIBRARY=$PYTHON/lib/libpython2.7.$PY_LIB_EXT \
-DPYTHON_UTIL_LIBRARY=/usr/lib64/libutil.$PY_LIB_EXT \
-DPARAVIEW_FREEZE_PYTHON=OFF \
-DBUILD_TESTING=OFF \
*-DPARAVIEW_BUILD_QT_GUI=OFF \**
** -DCMAKE_X_LIBS="" \**
** -DX11_LIBRARIES="" \**
** -DVTK_USE_X=OFF \**
** -DVTK_OPENGL_HAS_OSMESA=ON \**
** -DOSMESA_INCLUDE_DIR=$MESA/include \**
**-DOSMESA_LIBRARY="$MESA/lib/libOSMesa.$MESA_LIB_EXT;" \**
** -DOPENGL_INCLUDE_DIR=$MESA/include \**
**-DOPENGL_gl_LIBRARY=$MESA/lib/libOSMesa.$MESA_LIB_EXT \**
** -DOPENGL_glu_LIBRARY=$GLU/lib/libGLU.$GLU_LIB_EXT \**
** -DOPENGL_xmesa_INCLUDE_DIR=$MESA/include \*
-DPARAVIEW_USE_MPI=ON \
-DMPI_CXX_LIBRARIES="" \
-DMPI_C_LIBRARIES="-Wl,--start-group;$MPT/libmpich.$LIB_EXT;$PMI/libpmi.$LIB_EXT;$DMAPP/libdmapp.$LIB_EXT;$MPT/libmpichcxx.$LIB_EXT;$UGNI/libugni.$LIB_EXT;$ALPS/libalpslli.$LIB_EXT;$ALPS/libalpsutil.$LIB_EXT;$RCA/librca.$LIB_EXT;$XPMEM/libxpmem.$LIB_EXT;-Wl,--end-group;"
\
-DMPI_INCLUDE_PATH=$MPT/../include \
-DMPIEXEC=`which srun` \
-DMPI_CXX_LIBRARIES="" \
-DPARAVIEW_USE_VISITBRIDGE=ON \
-DBoost_INCLUDE_DIR=$BOOST/include \
-DVISIT_BUILD_READER_CGNS=OFF \
-DVISIT_BUILD_READER_Silo=OFF \
-DVTK_USE_SYSTEM_HDF5=OFF \
-DPARAVIEW_INSTALL_DEVELOPMENT_FILES=ON \
$*
On 05/15/2017 02:24 AM, Patrick Begou wrote:
Hi Chuck, Hi Burlen
Thanks for your reply.
I've attached the setup of my mesa installation. I have more options
enabled in my config than in yours. May be too much as this frontend
has no GPU available.
I'll try a setup with -DVTK_USE_X=OFF as Burlen suggest, but is it
possible to build paraview GUI with this option ? It is not clear for me.
Patrick
prefix: /share/apps/paraview-5.3.0
exec_prefix: ${prefix}
libdir: ${exec_prefix}/lib
includedir: ${prefix}/include
OpenGL: yes (ES1: yes ES2: yes)
OSMesa: libOSMesa (Gallium)
DRI platform: drm
DRI drivers: i915 i965 nouveau r200 radeon swrast
DRI driver dir: ${libdir}/dri
GLX: DRI-based
EGL: yes
EGL platforms: x11 drm
EGL drivers: builtin:egl_dri2 builtin:egl_dri3
GBM: yes
Vulkan drivers: no
llvm: yes
llvm-config: /share/apps/paraview-5.3.0/bin/llvm-config
llvm-version: 4.0.0
Gallium drivers: r300 r600 svga swrast
Gallium st: mesa xvmc
HUD extra stats: no
HUD lmsensors: no
Shared libs: yes
Static libs: no
Shared-glapi: yes
CFLAGS: -g -O2 -Wall -std=c99
-Werror=implicit-function-declaration -Werror=missing-prototypes
-fno-math-errno -fno-trapping-math
CXXFLAGS: -g -O2 -Wall -fno-math-errno -fno-trapping-math
Macros: -D__STDC_LIMIT_MACROS
-D__STDC_CONSTANT_MACROS -D_GNU_SOURCE -DUSE_SSE41
-DUSE_GCC_ATOMIC_BUILTINS -DNDEBUG -DUSE_X86_64_ASM -DHAVE_XLOCALE_H
-DHAVE_SYS_SYSCTL_H -DHAVE_STRTOF -DHAVE_MKOSTEMP -DHAVE_DLOPEN
-DHAVE_POSIX_MEMALIGN -DHAVE_LIBDRM -DGLX_USE_DRM
-DGLX_INDIRECT_RENDERING -DGLX_DIRECT_RENDERING -DGLX_USE_TLS
-DHAVE_DRI3 -DENABLE_SHADER_CACHE -DHAVE_MINCORE -DHAVE_LLVM=0x0400
-DMESA_LLVM_VERSION_PATCH=0
LLVM_CFLAGS: -I/share/apps/paraview-5.3.0/include
-D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS
LLVM_CXXFLAGS: -I/share/apps/paraview-5.3.0/include
-std=c++11 -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS
-D__STDC_LIMIT_MACROS
LLVM_CPPFLAGS: -I/share/apps/paraview-5.3.0/include
-D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS
LLVM_LDFLAGS: -L/share/apps/paraview-5.3.0/lib
PYTHON2: python2.7
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
