> > And the result is somewhat as expected except that another pressure > profile with an undeformed structural part is also visible with what I > actually want to get. Please see the attached screenshot with the settings > and visible fields. >
Did you turn off the visibility of the original file? I suspect you are seeing the original undisplaced surface in that location, and it is covering up the warped surface. Cory p.s. We are moving community support to https://discourse.paraview.org. Please post new requests there. Thanks! > Do I have a misunderstanding to accomplish this task. At the end, I would > like to show the pressure profile which is a scalar field in the file along > with the displacement field on the beam at the top edge. > > I was thinking if there is deformed+undeformed visibility selection > somehwere or not, maybe the issue is completely something else. > > Any comments are appreciated. > > BR, > Umut > > P.S. For a decent view for the deformed vector field, you can set the > scale factor of the warpbyvector field to 0.1 to 0.15 > > _______________________________________________ > Powered by www.kitware.com > > ParaView discussion is moving! Please visit > https://discourse.paraview.org/ for future posts. > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > https://public.kitware.com/mailman/listinfo/paraview > -- Cory Quammen Staff R&D Engineer Kitware, Inc.
_______________________________________________ Powered by www.kitware.com ParaView discussion is moving! Please visit https://discourse.paraview.org/ for future posts. Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://public.kitware.com/mailman/listinfo/paraview
