16 Kas 2006 Per 20:42 , Ismail Donmez : >16 Kas 2006 Per 20:26 tarihinde, UGURFIRAT þunlarý yazmýþtý: >[...] > >> Pikatel USB >> Zoom USB >> >> her ikisinde de sorun ayný >> >> IBM ugur # lsusb >> Bus 002 Device 001: ID 0000:0000 >> Bus 003 Device 001: ID 0000:0000 >> Bus 003 Device 002: ID 0fe8:8102 >> Bus 003 Device 003: ID 06a2:0033 Topro Technology, Inc. >> Bus 001 Device 001: ID 0000:0000 >> Bus 004 Device 001: ID 0000:0000 >> >> >> bide biþe ifade edermi bilmiyorum ama >> >> IBM ugur # eciadsl-start >> Warning: couldn't find /etc/eciadsl/eciadsl.conf, default config assumed >> [EciAdsl 1/5] Setting up USB support... >> Preliminary USB device filesystem is OK >> [EciAdsl 2/5] Uploading firmware... >> ERROR: modem not found > >eciadsl çok çok sorunlu bir sürücü çalýþmýyor doðru dürüst ama Zoom > modemin sorunsuz desteklenmesi lazým, onun usb id'si ne acaba? > >Bi de Zoom modem takýlýyken dmesg > dmesg.txt deyip dmesg.txt'i > gönderirseniz iyi olur. > >/ismail >_______________________________________________ >Pardus-kullanicilari mailing list >Pardus-kullanicilari at uludag.org.tr >http://liste.uludag.org.tr/mailman/listinfo/pardus-kullanicilari
dmesg cýktýsý ektedir ayrýca http://rafb.net/paste/results/huhdv048.html -------------- sonraki bölüm -------------- Linux version 2.6.18.1-57 (pardus at buildfarm) (gcc version 3.4.6) #2 SMP Sat Oct 14 16:04:44 EEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable) BIOS-e820: 000000001f6e0000 - 000000001f6f7000 (ACPI data) BIOS-e820: 000000001f6f7000 - 000000001f6f9000 (ACPI NVS) BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 502MB LOWMEM available. On node 0 totalpages: 128736 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 124640 pages, LIFO batch:31 DMI present. IO/L-APIC allowed because system is MP or new enough ACPI: RSDP (v002 IBM ) @ 0x000f6ec0 ACPI: XSDT (v001 IBM TP-1W 0x00002020 LTP 0x00000000) @ 0x1f6ef33d ACPI: FADT (v003 IBM TP-1W 0x00002020 IBM 0x00000001) @ 0x1f6ef400 ACPI: SSDT (v001 IBM TP-1W 0x00002020 MSFT 0x0100000e) @ 0x1f6ef5b4 ACPI: ECDT (v001 IBM TP-1W 0x00002020 IBM 0x00000001) @ 0x1f6f6e4c ACPI: TCPA (v001 IBM TP-1W 0x00002020 PTL 0x00000001) @ 0x1f6f6e9e ACPI: BOOT (v001 IBM TP-1W 0x00002020 LTP 0x00000001) @ 0x1f6f6fd8 ACPI: DSDT (v001 IBM TP-1W 0x00002020 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) Detected 1594.909 MHz processor. Built 1 zonelists. Total pages: 128736 Kernel command line: root=/dev/hda6 video=vesafb:nomtrr,pmipal,ywrap,1024x768-32 at 60 splash=silent,theme:pardus console=tty2 mudur=language:tr quiet Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (013fa000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 502860k/514944k available (2413k kernel code, 11508k reserved, 813k data, 1236k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3190.64 BogoMIPS (lpj=1595322) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed checking if image is initramfs... it is Freeing initrd memory: 2243k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. ACPI: setting ELCR to 0200 (from 0800) CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8c6, last bus=5 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Found ECDT ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 3, cardbus bridge: 0000:02:00.0 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: f0000000-f1ffffff MEM window: d2000000-d3ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-6fff MEM window: d0200000-dfffffff PREFETCH window: f0000000-f7ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. IBM machine detected. Enabling interrupts during APM calls. apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1163699669.708:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 3.1 (2006/08/19) Phillip Lougher SGI XFS with ACLs, security attributes, no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Real Time Clock Driver v1.12ac vesafb: Intel Corporation, Intel(r)852GM/852GME/855GM/855GME Graphics Controller, Hardware Version 0.0 (OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS) vesafb: VBE version: 3.0 vesafb: VBIOS/hardware doesn't support DDC transfers vesafb: no monitor limits have been set vesafb: scrolling: redraw Console: switching to colour frame buffer device 128x48 fbsplash: console 0 using theme 'pardus' fbsplash: switched splash state to 'on' on console 0 vesafb: framebuffer at 0xe0000000, mapped to 0xd0080000, using 6144k, total 8000k fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt for device 0000:00:1f.6 disabled floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS424040M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/1739KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input1 input: AT Translated Set 2 keyboard as /class/input/input2 NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 1236k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18.1-57 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.18.1-57 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.18.1-57 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.18.1-57 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input3 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: new device found, idVendor=0fe8, idProduct=8102 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: USB-ADSL Modem usb 3-1: Manufacturer: GlobeSpan Inc. usb 3-1: SerialNumber: UADSLG usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: new device found, idVendor=06a2, idProduct=0033 usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Mouse usb 3-2: Manufacturer: Topro usb 3-2: configuration #1 chosen from 1 choice parport: PnPBIOS parport detected. parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on hda6, internal journal Adding 562232k swap on /dev/hda7. Priority:-1 extents:1 across:562232k PCI: Enabling device 0000:00:1f.6 (0000 -> 0001) ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ALSA /var/tmp/pisi/alsa-driver-1.0.13-14/work/alsa-driver-1.0.13/pci/ac97/ac97_codec.c:2136: MC'97 1 converters and GPIO not ready (0xff00) usbcore: registered new driver hiddev input: Topro USB Mouse as /class/input/input4 input: USB HID v1.10 Mouse [Topro USB Mouse] on usb-0000:00:1d.1-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ts: Compaq touchscreen protocol output i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe0000000 Intel 82802 RNG detected ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) Time: acpi_pm clocksource has been installed. ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 ALSA /var/tmp/pisi/alsa-driver-1.0.13-14/work/alsa-driver-1.0.13/pci/ac97/ac97_codec.c:2104: AC'97 0 analog subsections not ready intel8x0_measure_ac97_clock: measured 50461 usecs intel8x0: clocking to 48000 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 Yenta: ISA IRQ mask 0x0478, PCI irq 11 Socket status: 30000020 pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff cs: IO port probe 0x3000-0x6fff: clean. pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff ieee80211_crypt: registered algorithm 'NULL' ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) pccard: CardBus card inserted into slot 0 cs: IO port probe 0x100-0x3af: clean. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. 8139too Fast Ethernet driver 0.9.27 PCI: Enabling device 0000:03:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth1: RealTek RTL8139 at 0xd0a5c000, 00:02:44:b3:25:e9, IRQ 11 eth1: Identified 8139 chip type 'RTL-8139C' hsfengine: module license 'see LICENSE file distributed with driver' taints kernel. 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) eth1 renamed to eth1_rename ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 fbsplash: switched splash state to 'off' on console 0 fbsplash: console 0 using theme 'pardus' fbsplash: switched splash state to 'on' on console 0 fbsplash: console 1 using theme 'pardus' fbsplash: switched splash state to 'on' on console 1 fbsplash: console 2 using theme 'pardus' fbsplash: switched splash state to 'on' on console 2 fbsplash: console 3 using theme 'pardus' fbsplash: switched splash state to 'on' on console 3 fbsplash: console 4 using theme 'pardus' fbsplash: switched splash state to 'on' on console 4 fbsplash: console 5 using theme 'pardus' fbsplash: switched splash state to 'on' on console 5 NET: Registered protocol family 17 eth1_rename: link up, 100Mbps, full-duplex, lpa 0x41E1 eth0: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device->is_queue_full. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] Using specific hotkey driver ACPI: Thermal Zone [THM0] (60 C) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Using specific hotkey driver Using specific hotkey driver Using specific hotkey driver Using specific hotkey driver ip_tables: (C) 2000-2006 Netfilter Core Team Using specific hotkey driver Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4023 buckets, 32184 max) - 228 bytes per conntrack HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. Using specific hotkey driver Using specific hotkey driver [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized i915 1.5.0 20060119 on minor 0 [drm] Initialized i915 1.5.0 20060119 on minor 1 eth1_rename: link up, 100Mbps, full-duplex, lpa 0x41E1 eth1_rename: link up, 100Mbps, full-duplex, lpa 0x41E1 NET: Registered protocol family 8 NET: Registered protocol family 20 br2684_create: register_netdev failed br2684_create: register_netdev failed CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 br2684_create: register_netdev failed br2684_create: register_netdev failed br2684_create: register_netdev failed usb 3-1: USB disconnect, address 2 usb 3-1: new full speed USB device using uhci_hcd and address 4 usb 3-1: new device found, idVendor=1803, idProduct=5510 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: ADSL USB MODEM usb 3-1: Manufacturer: - usb 3-1: SerialNumber: 67882636 usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new driver cxacru cxacru 3-1:1.0: firmware (cxacru-fw.bin) unavailable (system misconfigured?) usb 3-2: USB disconnect, address 3 usb 3-2: new low speed USB device using uhci_hcd and address 5 usb 3-2: new device found, idVendor=06a2, idProduct=0033 usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Mouse usb 3-2: Manufacturer: Topro usb 3-2: configuration #1 chosen from 1 choice input: Topro USB Mouse as /class/input/input5 input: USB HID v1.10 Mouse [Topro USB Mouse] on usb-0000:00:1d.1-2 br2684_create: register_netdev failed
