Bir IDE-USB çevirici aldým ve evdeki IDE disklerimi USB'den bilgisayara
baðlayýp içindeki verileri yedeklemekle uðraþýyorum.
Sorun þu:
Windows'ta hem ext3 hem de ntfs formatlý disklerden veri transferi gayet
hýzlý.
Ancak Pardus 2007.1'de hem ntfs hem de ext3 formatlý disklerden veri
transferi gayet YAVAS.
Bu konuda ne yapmalýyým?
Saygýlar.
Ýlgili dmesg çýktýsý þu þekilde:
usb 1-7: new high speed USB device using ehci_hcd and address 5
usb 1-7: new device found, idVendor=067b, idProduct=2506
usb 1-7: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: Mass Storage Device
usb 1-7: Manufacturer: Prolific Technology Inc.
usb 1-7: SerialNumber: 0
usb 1-7: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
Vendor: ST340016 Model: A Rev: 3.19
Type: Direct-Access ANSI SCSI revision: 00
sdb: assuming drive cache: write through
SCSI device sdb: 78165360 512-byte hdwr sectors (40021 MB)
sdb: Write Protect is off
sdb: Mode Sense: 03 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1 sdb2
sd 5:0:0:0: Attached scsi disk sdb
usb-storage: device scan complete
# hdparm /dev/sdb
/dev/sdb:
readonly = 0 (off)
readahead = 256 (on)
geometry = 4865/255/63, sectors = 78165360, start = 0
# sdparm /dev/sdb --all
/dev/sdb: WDC WD40 0BB-00CAA1 17.0
-------------- sonraki bölüm --------------
Bir HTML eklentisi temizlendi...
URL:
http://liste.uludag.org.tr/pardus-kullanicilari/attachments/20070401/a5170159/attachment.html
