So, is there any way to find out if an IP is registered with dyndns then?

Thanks,
Adrian

On Thu, Jun 25, 2009 at 4:53 PM, <[email protected]> wrote:

> That actually seems like a reasonable response.  Dyndns probably isn't
> authoritative for the reverse zone.  It is also likely that they don't
> support recursive queries from external clients.  As a result, the IP you
> are looking for is, in all likelihood, *not* in dyndns server's  cache.
>
> --
> byte_bucket
>
> > I've gave those a shot without luck. Here are the results I got(I change
> > my
> > IP to ip-obmitted  for this output):
> >
> >
> >
> > C:\Users\adrian>nslookup -norecurse ip-obmitted ns1.dyndns.org
> > (root)  nameserver = H.ROOT-SERVERS.NET
> > (root)  nameserver = K.ROOT-SERVERS.NET
> > (root)  nameserver = M.ROOT-SERVERS.NET
> > (root)  nameserver = A.ROOT-SERVERS.NET
> > (root)  nameserver = D.ROOT-SERVERS.NET
> > (root)  nameserver = C.ROOT-SERVERS.NET
> > (root)  nameserver = E.ROOT-SERVERS.NET
> > (root)  nameserver = I.ROOT-SERVERS.NET
> > (root)  nameserver = J.ROOT-SERVERS.NET
> > (root)  nameserver = G.ROOT-SERVERS.NET
> > (root)  nameserver = F.ROOT-SERVERS.NET
> > (root)  nameserver = L.ROOT-SERVERS.NET
> > (root)  nameserver = B.ROOT-SERVERS.NET
> > Server:  UnKnown
> > Address:  204.13.248.75
> >
> > (root)  nameserver = B.ROOT-SERVERS.NET
> > (root)  nameserver = C.ROOT-SERVERS.NET
> > (root)  nameserver = I.ROOT-SERVERS.NET
> > (root)  nameserver = J.ROOT-SERVERS.NET
> > (root)  nameserver = K.ROOT-SERVERS.NET
> > (root)  nameserver = G.ROOT-SERVERS.NET
> > (root)  nameserver = M.ROOT-SERVERS.NET
> > (root)  nameserver = F.ROOT-SERVERS.NET
> > (root)  nameserver = A.ROOT-SERVERS.NET
> > (root)  nameserver = E.ROOT-SERVERS.NET
> > (root)  nameserver = L.ROOT-SERVERS.NET
> > (root)  nameserver = H.ROOT-SERVERS.NET
> > (root)  nameserver = D.ROOT-SERVERS.NET
> > *** No internal type for both IPv4 and IPv6 Addresses (A+AAAA) records
> > available
> >  for ip-obmitted
> >
> >
> >
> >
> >
> > dig @ns1.dyndns.org ip-obmitted
> >
> > ; <<>> DiG 9.2.4 <<>> @ns1.dyndns.org ip-obmitted
> > ;; global options:  printcmd
> > ;; Got answer:
> > ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15548
> > ;; flags: qr rd; QUERY: 1, ANSWER: 0, AUTHORITY: 13, ADDITIONAL: 0
> >
> > ;; QUESTION SECTION:
> > ;ip-obmitted.                 IN      A
> >
> > ;; AUTHORITY SECTION:
> > .                       518400  IN      NS      H.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      M.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      K.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      E.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      I.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      G.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      F.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      A.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      L.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      B.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      J.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      C.ROOT-SERVERS.NET.
> > .                       518400  IN      NS      D.ROOT-SERVERS.NET.
> >
> > ;; Query time: 93 msec
> > ;; SERVER: 204.13.248.75#53(ns1.dyndns.org)
> > ;; WHEN: Thu Jun 25 12:35:53 2009
> > ;; MSG SIZE  rcvd: 242
> >
> >
> >
> > On Thu, Jun 25, 2009 at 2:05 PM, Jonathan Moore
> > <[email protected]>wrote:
> >
> >> On Thu, Jun 25, 2009 at 12:32 PM, Adrian Crenshaw<[email protected]
> >
> >> wrote:
> >> > Does anyone know a way to specify a reverse DNS look up against a
> >> specific
> >> > DNS provider? I don't want to use the DNS that is authoritive for  the
> >> given
> >> > IP range. For example, look up all of the IPs at my org to see if any
> >> are
> >> > mapped to some host name at DYNDNS? Some bot nets use these services
> >> for
> >> > naming, so I thought this might be useful.
> >>
> >> I may be misunderstanding, but both nslookup and dig let you specify
> >> the server to query.  Using dig, adding @server.example.org to the
> >> command tells dig to query only that server (IIRC).
> >>
> >>  dig @ns1.everydns.net yahoo.com
> >>
> >> HTH
> >>
> >> -jonathan
> >> _______________________________________________
> >> Pauldotcom mailing list
> >> [email protected]
> >> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
> >> Main Web Site: http://pauldotcom.com
> >>
> > _______________________________________________
> > Pauldotcom mailing list
> > [email protected]
> > http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
> > Main Web Site: http://pauldotcom.com
>
>
> _______________________________________________
> Pauldotcom mailing list
> [email protected]
> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
> Main Web Site: http://pauldotcom.com
>
_______________________________________________
Pauldotcom mailing list
[email protected]
http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
Main Web Site: http://pauldotcom.com

Reply via email to