So what would be the easiest way to find the IP subnet the AP is on? I assume it's necessary to have/set an IP address to be able to get the network info. Is this correct?
Bert Jim Halfpenny wrote: > You can try pings to broadcast networks rather than scanning the > entire network. You can also try setting you MAC address to that of > the AP to try and bypass MAC filtering. Maybe RARP will work? There's > a lot of different things you can try. > > Jim > > 2009/11/12 Bert Van Kets <[email protected] > <mailto:[email protected]>> > > Hi guys, > > I was wondering what methods or commands can be used to get past the > following situation: > You access a WiFi AP with WEP encryption, you get the key and can > connect but do not get an IP address. I assume this is due to the > use of > fixed IPs only (no dhcp). How do you get past this? How do you get > info > in the IP range? Do I need to nMap scan every possible internal IP > range??? > What if no clients are connected and Mac address filtering is switched > on on top of the lack of dhcp? I luckily do have a client Mac address, > but if I didn't have this it would be an extra hurdle. > My knowledge and experience have encountered a concrete wall. How do I > climb it? > > Thanks for any help. > > Bert > _______________________________________________ > Pauldotcom mailing list > [email protected] <mailto:[email protected]> > http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom > Main Web Site: http://pauldotcom.com > > > ------------------------------------------------------------------------ > > _______________________________________________ > Pauldotcom mailing list > [email protected] > http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom > Main Web Site: http://pauldotcom.com _______________________________________________ Pauldotcom mailing list [email protected] http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom Main Web Site: http://pauldotcom.com
