I'm thinking of risking buying the cloner from Deal Extreme, the one
Robin posted seen to be main { 110-220v } only, has anybody used the
below version with seem to be the same{ish} but also 9v battery
powered.

http://www.dealextreme.com/p/125khz-135khz-rfid-card-copier-duplicator-1-x-6f22-9v-126001?item=2


On 12 June 2012 06:01, Arch Angel <[email protected]> wrote:
> Again +1 for Matt :-)
>
> As mentioned it is clunky when trying to do things while on the move, once
> things settle down I plan on looking at the entire RFID project I did and
> seeing how to make it easier to do things on the move.
>
>
> --
>
> Thank you,
>
> Robert Miller
> (arch3angel)
>
> On 9/25/10 5:57 PM, Matt Neely wrote:
>>
>> Johan,
>>
>> I have a Proxmark3.  With the antennas they sell at Proxmark3.com the
>> read range is about an inch with the LF antenna and about half an inch
>> with the HF antenna.  You could make your own custom antennas and
>> increase the read the range.
>>
>> The Proxmark3 is a very powerful and versatile device.  Its great if you
>> want to reverse engineer or manipulate RFID tags.
>>
>> Cheers,
>> Matt
>>
>> Johan Peder Møller wrote:
>>>
>>> Hi
>>>
>>> Anyone tried the proxmark3?
>>>
>>> I'm interested as to what range you can get on it.
>>>
>>> rgds
>>> Johan
>>>
>>> On Thu, Sep 23, 2010 at 5:41 PM, Albert R. Campa <[email protected]
>>> <mailto:[email protected]>> wrote:
>>>
>>>     do you plan on making a cheaper version of this?
>>>     http://proxmark3.com/
>>>
>>>     __________________________________
>>>     Albert R. Campa
>>>
>>>
>>>
>>>     On Thu, Sep 23, 2010 at 8:06 AM, Adrian Crenshaw
>>>     <[email protected] <mailto:[email protected]>> wrote:
>>>
>>>         Right not I plan to make a portable RFID reader with it.
>>>
>>>         Adrian
>>>
>>>
>>>         On Wed, Sep 22, 2010 at 11:05 PM, Colin Vallance
>>>         <[email protected] <mailto:[email protected]>> wrote:
>>>
>>>             Adrian,
>>>
>>>             I'd be interested to hear what you end up doing with those
>>>             if it's anything more than just exploring.  (The same goes
>>>             for you too Larry!)
>>>
>>>             That being said I said I was going to go buy some last
>>>             Friday and I got to the shack they were supposed to be at
>>>             and they couldn't find them.  >.<  I'm hoping I'll have
>>>             another chance this week to go take a look.
>>>
>>>             On Wed, Sep 22, 2010 at 7:15 PM, Adrian Crenshaw
>>>             <[email protected] <mailto:[email protected]>> wrote:
>>>
>>>                 Ok, after what Matt said, and doing some more looking
>>>                 around, maybe 125Khz is used in more than just the
>>>                 hobby world. Got some bigger items on order, but Radio
>>>                 Shack was clearing out these:
>>>
>>> http://www.radioshack.com/product/index.jsp?productId=2906723
>>>
>>>                 Seem to work with just an FTDI cable, and for less
>>>                 than $9 I bought the last two in Louisville. :)
>>>
>>>
>>>                 Adrian
>>>
>>>                 _______________________________________________
>>>                 Pauldotcom mailing list
>>>                 [email protected]
>>>                 <mailto:[email protected]>
>>>
>>> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
>>>                 Main Web Site: http://pauldotcom.com
>>>
>>>
>>>
>>>             _______________________________________________
>>>             Pauldotcom mailing list
>>>             [email protected]
>>>             <mailto:[email protected]>
>>>
>>> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
>>>             Main Web Site: http://pauldotcom.com
>>>
>>>
>>>
>>>         _______________________________________________
>>>         Pauldotcom mailing list
>>>         [email protected]
>>>         <mailto:[email protected]>
>>>         http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
>>>         Main Web Site: http://pauldotcom.com
>>>
>>>
>>>
>>>     _______________________________________________
>>>     Pauldotcom mailing list
>>>     [email protected]
>>> <mailto:[email protected]>
>>>     http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
>>>     Main Web Site: http://pauldotcom.com
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Pauldotcom mailing list
>>> [email protected]
>>> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
>>> Main Web Site: http://pauldotcom.com
>>
>> _______________________________________________
>> Pauldotcom mailing list
>> [email protected]
>> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
>> Main Web Site: http://pauldotcom.com
>>
>
> _______________________________________________
> Pauldotcom mailing list
> [email protected]
> http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
> Main Web Site: http://pauldotcom.com



-- 
ฤ๊๊๊๊๊็็็็็๊๊๊๊๊็็็็
ฮ้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้้
ฦ้้้้้็็็็็้้้้้็็็็็้้้้้้้้็็็็็้้้้้็็็็็้้้้้้้้็็็็็้้้้้็็็็็้้้้้้้้็็็็็้้้

BaconZombie

LOAD "*",8,1
_______________________________________________
Pauldotcom mailing list
[email protected]
http://mail.pauldotcom.com/cgi-bin/mailman/listinfo/pauldotcom
Main Web Site: http://pauldotcom.com

Reply via email to