Hi Ann, I finally figured it out, because total recorder behaves the way it does when you're making normal recordings, and by that I mean that if a source like winamp or media player is started before total recorder is, then, it won't record, because it sees a driver or something like that, so, what I finally did was this, schedule the test recording before a stream was started, and then leave total recorder running, start the stream before the scheduled time, and then it recorded the stream, because, in a sense, after you schedule a recording with total recorder, it's as if, you're recording something, even though you actually aren't, so now, I will use it to record at least an hour of the antologias program from x e d x in Ensenada, if they don't change the location of the stream for that station, as they often do. On Sat, 29 Oct 2005 18:24:13 -0400, Ann wrote:
>Hi Marty, > >This might be a long message, because many things might have happened to >cause this problem. I'm remembering why I switched from standard to Pro now >as it's easier to schedule stream recording with Pro, but still ... > >Ok, let's see. If you were at your computer, and total recorder popped up >and you closed it during the time it was to record, it is possible you >inadvertently cancelled the recording by mistake when you closed the >program. The program does not, I think, automatically default to running in >your system tray when it is closed. > >Or, it is possible the wrong recording source was selected, and that is why >there was no signal to be recorded. When you scheduled your recording, what >did you have set under the Recording Source & Parameters dialogs, record >from Software or from the soundboard? Usually, if you are recording a >stream, the Software choice works quite well. The soundboard option lets you >select various sound sources such as a secondary soundcard, if you have one, >and various input sources from your soundcard such as the Line in, >microphone, etc. I'd open Total recorder, and then open the scheduler and >double check what is selected under Recording Source and Parameters, and try >using the Software option before playing around with Soundboard, and all >it's many choices. > >Try playing with it a bit, and making some test recordings to get really >comfortable with the program before your next scheduled recording is to take >place. . Total recorder can take a bit of getting used to, and I missed a >couple of scheduled programs before I finally got mine completely >straightened out. > >Feel free to write to me off list if you need any help. > >~Ann > > >----- Original Message ----- >From: "Marty Rimpau" <[EMAIL PROTECTED]> >To: "pc-audio list" <[email protected]> >Sent: Saturday, October 29, 2005 4:34 PM >Subject: tried to record with total recorder scheduler > > >> Hi all, I tried to record with total recorder scheduler, and I >> understood from this list that you had to have the stream going before >> the recording could be made, well, I scheduled the time, and had the >> stream going, but no file got recorded, instead, it said no signal, and >> I don't know why it did that, seeing that kerio personal firewall >> didn't come up and warn me about a connection, so, what might have I >> done wrong? I did close total recorder, because I didn't know if it >> had to be running, because ftp voyager doesn't need to be running for >> its' scheduler to work, so I had total recorder scheduler start in ms >> config, but when I checked what I thought was a file, there was none, >> and, in the scheduler, it gave the name and location of the file, but >> said, no signal, so what went wrong, because it was acting the way >> total recorder usually does when winamp is started before a stream, by >> not recording, yet, with standard edition, I was told I had to have the >> stream up before total recorder could record the stream, and the radio >> button was set to record the file, so is the trick to leave total >> recorder running until the event is over, or will the scheduler take >> care of things, because, total recorder did come up during the >> scheduled time, but it was as if, the scheduler totally ignored the >> part about recording the file I wanted. This with total recorder >> version 5.3, window-eyes 5.5 beta2, windows 98 se, 192 megs of ram, and >> a 400 megs processor. >> >> Marty >> >> >> >> _______________________________________________ >> PC-Audio List Help, Guidelines, Archives and more... >> http://www.pc-audio.org >> >> To unsubscribe from this list, send a blank email to: >> [EMAIL PROTECTED] >> >> This list is a service of MosenExplosion.com. To see what other lists we >> offer, visit us on the web at http://www.MosenExplosion.com >> >> > > >_______________________________________________ >PC-Audio List Help, Guidelines, Archives and more... >http://www.pc-audio.org > >To unsubscribe from this list, send a blank email to: >[EMAIL PROTECTED] > >This list is a service of MosenExplosion.com. To see what other lists we >offer, visit us on the web at http://www.MosenExplosion.com > Marty _______________________________________________ PC-Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] This list is a service of MosenExplosion.com. To see what other lists we offer, visit us on the web at http://www.MosenExplosion.com
