This message is from another list. It contains instructions regarding how to record several streams at the same time using Total Recorder version 6.0 or higher. -Steve.
>From: Marco Curralejo [EMAIL PROTECTED] > >ok i'll try and run through it. > >whilst in total recorder, tab to recording source and parameters and press >the space bar. now tab down to recording source advanced... and again space >bar on that. then tab through to the following and ensure that they're set >as outlined below: > >remove silence prevent internet gaps should be checked. this is handy if >your stream keeps on buffering and you don't want gaps in a recording when >listening back to it. works excellently and you don't even know where a gap >may have been; > >record streams only after the recording has started should be checked. this >is another excellent feature which removes the long silence found at the >beginning of a recording in particular when your scheduling your recording >to start at a particular time. > >i have my recording level set to 126 as i find this will not distort your >recording but is of sufficient loudness so that you don't have to worry to >much about normalising a recording at a later stage. > >make sure that you install the total recorder driver and that you have the >recording source set to software, otherwise you won't be utilising the total >recorder driver and you need this so that you can record more than one >stream at a time. also, under recording source make sure that convert using >recording format specified below is checked so that the above settings take >effect. > >another thing is to go to options and settings and check the box that reads >total recorder virtual device status auto switch total recorders driver off >when total recorder is not active. this is important as you may need to >utilise your sound card with other programs and you don't want to run into >any conflicts down the track when total recorders presets may be still >lurking in the background somewhere. > >in the same screen, click on trouble shooting settings and make sure the >radio button is checked that reads use total recorders driver with all >applications. > >that's about it really. try recording a couple of streams starting about >half a minute apart or so and make sure they run at the same time and see if >it works. > >let me know how you all go. > >marco. Regards Steve Email: [EMAIL PROTECTED] Skype: steve1963 MSN Messenger: [EMAIL PROTECTED] _______________________________________________ PC-Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] This list is a service of MosenExplosion.com. To see what other lists we offer, visit us on the web at http://www.MosenExplosion.com