Hi,
This is the method I use, too. Dvd's seem to have the ridge
on both sides, and, some cd's have no ridge at all.
Rusty
>Ok. Here's the best way to identify the playing surface and non playing
>surface of a CD. Braille readers will be able to use their finger tips but
>for those who have sensitivity problems use your finger nail but very
>carefully. Probably the easiest way to do this, if you are doing it for the
>first time is to place the disc in the case. From the centre of the disc
>slowly run your finger nail towards the outer edge of the disc. About half
>an inch from the spindle hole you will find a deep groove, your finger nail
>will pick this up. This is the non playing surface. Now if you turn the
>disc up the other way and again slowly and gently run your finger nail from
>the centre towards the outer edge about half an inch from the centre you
>will find a ridge. Depending on the brand of the disc the ridge will vary
>in how pronounced it is but it is there and It is a ridge. This is the
>playing surface. Once you get used to feeling it then you will know at a
>very brief touch which side is which. Walter.
>
>
>
>
>
>Audio List Help, Guidelines, Archives and more...
>http://www.pc-audio.org
>
>To unsubscribe from this list, send a blank email to:
>[EMAIL PROTECTED]
>
>__________ NOD32 2520 (20070911) Information __________
>
>This message was checked by NOD32 antivirus system.
>http://www.eset.com
"For everything that lives is holy, life delights in life." (William
Blake)
Check out my site at:
http://www.thesoundzone.com
Audio List Help, Guidelines, Archives and more...
http://www.pc-audio.org
To unsubscribe from this list, send a blank email to:
[EMAIL PROTECTED]
