Hello Mario,
I have a question for you.
Are you running your processer in to the mike in jack of your sound card?
Because if you are, that mite be apart of your problem.
If you are using the line in jack of your sound card, the problem mite be,
you have it sat a little to high.
Reset this to about 50% and have the mane volume on your mixer sat to -2 DB
and your mike sat to -4 DB.
That should fix your problem.
My best regards.
John.
----- Original Message -----
From: "Mario" <[email protected]>
To: "PC Audio Discussion List" <[email protected]>
Sent: Thursday, March 25, 2010 6:59 AM
Subject: Audio question
Hi all, I have a question about a distorsion that sometimes happens in my
home studio:
I have a dbx vocal processor connected to a m-audio delta1010lt, and
sometimes when I record from a rode connected to this processor the
registration results distorted. First when I speak to the microphone it's
all ok, but when I press "play" I ear this problem. So I delete the
recording, record again and the registration is good. This problem was
present also when I used a sound blaster sound card without the processor
and with a different microphone.
Someone can help me to solve this issue?
Here is a link for listening to the damaged audio:
http://dl.dropbox.com/u/4784955/gracchio.mp3
Thanks!
A presto,
Mario Loreti
Speaker pubblicitario e radiofonico
-----------------------------------------------------
www.marioloreti.net
-----------------------------------------------------
To unsubscribe from this list, send a blank email to:
[email protected]
To unsubscribe from this list, send a blank email to:
[email protected]
