Dave,

You could try removing certain frequencies, but the trouble is that the wind noise covers quite a wide frequency band range. Then of course, the sound of your voice will inevitably change as you reduce frequencies.

It's a learning curve, and the olympus range are not tollerant of wind noise, even human breath on the nics. A wind shield could save this in future.

Regards,

JP
At 20:19 05/11/2010, you wrote:
Ok, I admit to being kind of disheartened at my apparent inability to record
decently in hostile environments.

The other week I was outdoors on boats and para-sailing with Olympus DM520
happily in hand.  Frankly the resulting recordings sound awful because of
the wind noise.  Is there anything I can do with Goldwave to reduce this
without killing the rest of the recording?  Is wind low or mid-range?  I
shouldn't be kicking myself on my birthday but I am; I expect better of me.

-----Original Message-----
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Gary Wood
Sent: Wednesday, November 03, 2010 11:34 PM
To: PC Audio Discussion List
Subject: Re: A tip to overcome one of the annoying problems with the Zoom H1

Thanks!
----- Original Message -----
From: "Dane Trethowan" <grtd...@internode.on.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Wednesday, November 03, 2010 3:16 AM
Subject: Re: A tip to overcome one of the annoying problems with the Zoom H1


I've not experimented much with MP3 files though logic would dictate that
the rate of writing would be smaller, the way I look at things regarding the

Zoom H1 is that I need not bother with MP3, after all! I have a computer
which probably does a far better job than the Zoom H1 does at MP3 encoding
<smile>.


On 03/11/2010, at 6:21 PM, Gary Wood wrote:

> Dane, you mentioned wav files.  How about whilst using MP3's, and the
> speed of those.
> ----- Original Message ----- From: "André van Deventer"
> <andred...@webafrica.org.za>
> To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
> Sent: Tuesday, November 02, 2010 11:13 AM
> Subject: RE: A tip to overcome one of the annoying problems with the Zoom
> H1
>
>
>> Dane
>>
>> There are many of these weird things I use the induction loop coils in a
>> hearing aid for.
>>
>> I can hear  the hard disk of my iriver hard drive booting up for example.
>> And my cell phone to know if it's starting up or not.
>>
>> If a normal hearing person can get hold of a small amplifier with an
>> induction  loop built in,  you will be able to check all kinds of
>> interesting things.
>>
>> Andre
>>
>>
>>
>> -----Original Message-----
>> From: pc-audio-boun...@pc-audio.org
>> [mailto:pc-audio-boun...@pc-audio.org]
>> On Behalf Of Dane Trethowan
>> Sent: 02 November 2010 04:37 AM
>> To: PC Audio Discussion List
>> Subject: A tip to overcome one of the annoying problems with the Zoom H1
>>
>> Hi!
>>
>> Now this tip isn't going to be for everyone as not everyone wears hearing
>> instruments which can be used with induction loops but if you do? Well
>> here's a handy way to use your instruments to great effect when sorting
>> out
>> one of the very few functions of the Zoom H1 which isn't accessible.
>>
>> I'm talking about the Bit and Sample rate of the file you're recording,
>> this
>> is changed in "Standby" mode by using the fast forward and rewind
>> buttons,
>> rewind takes you back through the cycle whilst fast forward takes you
>> forward through the cycle of bit and sample rates.
>>
>> When recording using Wave Broadcast format you cycle through 44.1KHZ 16
>> Bit,
>> 48KHZ 24 bit and so on right the way up to 96KHZ 24 and back to 44.1KHZ
>> 16
>> bit so how to tell where you are.
>>
>> Well turn your instruments to pick up induction loops and put the
>> recorder
>> near them.  Now start recording, you'll be able to hear the recorder as
>> it
>> writes to the SD card and the slower the rate of writing then the small
>> the
>> sample size, 44.1KHZ 16 bit has the Zoom H1 writing to the SD card about
>> every half second whilst 96KHZ 24 bit has the H1 writing to the SD card
>> every sixth of a second or so.
>>
>> Just thought others may find this helpful as I do, still haven't worked
>> out
>> a way to set the date and time for date/time stamping of recordings but I
>> have to admit to not trying too hard, after all! one can change all that
>> when the files are copied from the H1 to your computer.
>>
>>
>>
>> To unsubscribe from this list, send a blank email to:
>> pc-audio-unsubscr...@pc-audio.org
>>
>>
>> To unsubscribe from this list, send a blank email to:
>> pc-audio-unsubscr...@pc-audio.org
>
>
> To unsubscribe from this list, send a blank email to:
> pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


__________ Information from ESET Smart Security, version of virus signature
database 5591 (20101104) __________

The message was checked by ESET Smart Security.

http://www.eset.com


__________ Information from ESET Smart Security, version of virus signature
database 5595 (20101105) __________

The message was checked by ESET Smart Security.

http://www.eset.com



__________ Information from ESET Smart Security, version of virus signature
database 5595 (20101105) __________

The message was checked by ESET Smart Security.

http://www.eset.com



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Reply via email to