Hi! I hope to have one of these radio sets early next year and I'm very much looking forward to that, every demonstration I have of this radio makes me turn a violent shade of green envy <smile>.
So to a feature which I didn't know about, you can align the CC II/E which means the radio can adjust itself to the signal conditions its under to both minimise interference and to optimise signal reception for any part of the AM Broadcast band. Turning the radio to the AM Broadcast band and then holding the clock/frequency display toggle button down for 5 seconds causes the radio to beep, when the radio beeps you release the button. The radio starts scanning down the dial step by step until it reaches the lower limit of the AM band. Whilst the radio is stepping you'll hear the radio adjusting its RF gain etc for each step it moves to. Note that alignment for each station you set in each preset is stored alongside that station so if you do a factory reset of the radio, not only are the presets erased but all the alignment information is wiped too. ********** Dane Trethowan Skype: grtdane12 Phone US (213) 438-9741 Phone U.K. 01245 79 0598 Phone Australia (03) 9005 8589 Mobile: +61400494862 Fax +61397437954
