I'm not familiar with this type of set so can you explain a little about
how the memory system works, do you have to go into some sort of menu to
set and recall or does the radio - like so many Sangean radios these
days - have dedicated preset buttons.
If the latter is the case then you can just override existing presets
with new one's and probably do the same through the menu system if
that's the way the radio works.
On 12/8/2015 12:07 PM, Jim Portillo wrote:
The manual I've seen says nothing about this. It just says to take the
batteries out. They said a minute, but I don't believe that.
Deleting or overwriting is tough.
Thanks anyway. I appreciate your help.
-----Original Message-----
From: Pc-audio [mailto:[email protected]] On Behalf Of Dane
Trethowan
Sent: Monday, December 7, 2015 5:03 PM
To: PC Audio Discussion List <[email protected]>
Subject: Re: Question about a radio
Hi!
Firstly you might like to look on Sangean's web site and see if the manual
is available.
Second, don't be surprised if you can't easily clear memories on this radio.
I've seen many Sangeans now where the old power out or reset trick just
doesn't work for clearing memory presets any longer so you have to manually
delete them.
On 12/8/2015 11:57 AM, Jim Portillo wrote:
Hi there,
Does anyone have or did anyone used to have the Sangean dt-400? I had
to buy another one because mine fell out of my pocket on the bus, and
I never saw it again.
Here's my issue.
How can I clear the memory? I knew that if I took the batteries out
for either a minute or an hour, it would go back to factory resets.
Well, it's not doing that at all. I had batteries out for 24 hours at
one point, then 36, and it's not clearing anything. The stations I
preseet are completely messed up, and I basically wanted to start over
from scratch.
This thing is not clearing. Any ideas how I can do this?
Thanks.
Jim
--
**********
Those who don't need help are prepared to help themselves
