Hi PCEers
I did not see any reply on my previous comments I repost them with separate
threads, as the initial one were big
1. Section 2.2.1 : this is not only useful for stateful, but also for
stateless, this should be integrated to draft-ietf-pce-inter-layer-ext
2. Section 2.3 : is this GMPLS specific or stateful specific?
3. Section 2.4 : IMHO this should not be necessary, the generic part
should describe how to deal with non-supported objects,
4. Section 2.5 : This seems generic, I would expect a new section in the
WG document describing this generic procedure, it does not match the scope of
this document.,
5. Section 2.6 : how is this GMPLS-specific? This should be another set of
extensions maybe.
My understanding is that the required extension to support an *active* stateful
PCE for GMPLS network is contained in section 2.4, which indicates the
following:
o GENERALIZED BANDWIDTH -> Object, optional in the GMPLS extensions BTW
o PROTECTION ATTRIBUTE -> this should be LSPA PROTECTION-ATTRIBUTE TLV -->
This is already supported by draft-crabbe-pce-stateful-pce-mpls-te-00
o Extended Objects to support the inclusion of label sub-object
- RP
- IRO
- XRO
--> Those are not specific to GMPLS
So the only missing object to support active stateful GMPLS PCE is an optional
GENERALIZED-BANDWIDTH, this does not seem a big requirement.
I would rather see one solution for passive stateful and one for active
stateful than a mix of passive and active, plus 3 similar RSVP-TE solutions.
Mit freundlichen Grüßen / Best Regards
Cyril Margaria
Nokia Siemens Networks Optical GmbH
St.Martin-Str. 76
D-81541 München
Germany
mailto:[email protected]
Phone: +49-89-5159-16934
Fax: +49-89-5159-44-16934
----------------------------------------------------------------
Nokia Siemens Networks Optical GmbH
Geschäftsleitung / Board of Directors: Gero Neumeier, Dr. Rolf Nauerz
Sitz der Gesellschaft: München / Registered office: Munich
Registergericht: München / Commercial registry: Munich, HRB 197143
_______________________________________________
Pce mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/pce
