Good job getting this done quickly. Thanks. Adrian -- Support an author and your imagination. Tales from the Wood - Eighteen new fairy tales. More Tales from the Wood - Eighteen MORE new fairy tales. https://www.feedaread.com/profiles/8604/ http://www.amazon.co.uk/Tales-Wood-Adrian-Farrel/dp/1786100924 Or buy from me direct.
> -----Original Message----- > From: Pce [mailto:[email protected]] On Behalf Of RFC Errata System > Sent: 16 November 2016 05:59 > To: [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; > [email protected]; [email protected] > Cc: [email protected]; [email protected]; [email protected] > Subject: [Pce] [Errata Verified] RFC6006 (4868) > > The following errata report has been verified for RFC6006, > "Extensions to the Path Computation Element Communication Protocol (PCEP) > for Point-to-Multipoint Traffic Engineering Label Switched Paths". > > -------------------------------------- > You may review the report below and at: > http://www.rfc-editor.org/errata_search.php?rfc=6006&eid=4868 > > -------------------------------------- > Status: Verified > Type: Technical > > Reported by: DHRUV DHODY <[email protected]> > Date Reported: 2016-11-16 > Verified by: Deborah Brungard (IESG) > > Section: 3.5 > > Original Text > ------------- > <PCRep Message>::= <Common Header> > <response> > <response>::=<RP> > [<end-point-path-pair-list>] > [<NO-PATH>] > [<attribute-list>] > > where: > > <end-point-path-pair-list>::= > [<END-POINTS>]<path>[<end-point-path-pair-list>] > > <path> ::= (<ERO>|<SERO>) [<path>] > > <attribute-list>::=[<OF>] > [<LSPA>] > [<BANDWIDTH>] > [<metric-list>] > [<IRO>] > > Corrected Text > -------------- > <PCRep Message>::= <Common Header> > <response-list> > > where: > > <response-list>::=<response>[<response-list>] > > <response>::=<RP> > [<end-point-path-pair-list>] > [<NO-PATH>] > [<UNREACH-DESTINATION>] > [<attribute-list>] > > <end-point-path-pair-list>::= > [<END-POINTS>]<path>[<end-point-path-pair-list>] > > <path> ::= (<ERO>|<SERO>) [<path>] > > where: > > <attribute-list>::=[<OF>] > [<LSPA>] > [<BANDWIDTH>] > [<metric-list>] > [<IRO>] > > Notes > ----- > o Update the RBNF for Reply message format: > > * Update PCEP allows for the bundling of multiple path computation > responses within a single Path Computation Reply (PCRep) message. > > * Update UNREACH-DESTINATION in PCRep message. This object was > missed in [RFC6006]. > > Refer: https://datatracker.ietf.org/doc/draft-palleti-pce- > rfc6006bis/?include_text=1 > > -------------------------------------- > RFC6006 (draft-ietf-pce-pcep-p2mp-extensions-11) > -------------------------------------- > Title : Extensions to the Path Computation Element Communication > Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths > Publication Date : September 2010 > Author(s) : Q. Zhao, Ed., D. King, Ed., F. Verhaeghe, T. Takeda, Z. Ali, J. > Meuric > Category : PROPOSED STANDARD > Source : Path Computation Element > Area : Routing > Stream : IETF > Verifying Party : IESG > > _______________________________________________ > Pce mailing list > [email protected] > https://www.ietf.org/mailman/listinfo/pce _______________________________________________ Pce mailing list [email protected] https://www.ietf.org/mailman/listinfo/pce
